Voretx strike eagle mount

[THESEUS]

I'm looking to mount my Vortex strike eagle on my AR but no idea which mount I need …


Whats your suggestions

 

[KePet]

Burris PEPR.

 

[rifleman338]

Vortex makes a Sport Cantilever mount in 30mm that will work perfectly, Part# CM-203. Lots of vendors on here carry it.

 

[Nucknfutz]

I just went through this, I wanted a Vortex cantilevered mount with a 2" offset to secure my Vortex strike eagle 1-6×24 to my Wk180c, but everyone seemed to be sold out at the moment so I went with one of these from Al Flaherty, I read some good reviews. The price is low enough almost 1/3 of the vortex mount, that I won't be to upset if I don't like it.
https://alflahertys.com/utg-accu-sync-30mm-high-profile-34mm-offset-picatinny-rings-air32234/

 

[Wester]

The Burris P.E.P.R. QR has enough rise to make a 1/3 co-witness.

 

[Scott_N]

I went with the Burris P.E.P.R. QR. It has enough rise to make a 1/3 co-witness out of my A2 front sight post, perfect.

This is what I have too, works like a charm.

 

[THESEUS]

I just went through this, I wanted a Vortex cantilevered mount with a 2" offset to secure my Vortex strike eagle 1-6×24 to my Wk180c, but everyone seemed to be sold out at the moment so I went with one of these from Al Flaherty, I read some good reviews. The price is low enough almost 1/3 of the vortex mount, that I won't be to upset if I don't like it.
https://alflahertys.com/utg-accu-sync-30mm-high-profile-34mm-offset-picatinny-rings-air32234/

Did you end up happy with the purchase?

 

[Aprilia Man]

ADM QD-Recon Mount ! ...... Very solid and holds zero reliably.

 

[Mr.Sparkle]

The Burris PEPR mounts are very solid and reasonably priced. I have used several of them with no issues.

 

[oppy]

Another vote for Burris P.E.P.R.

 

[JoeShmow]

The strike eagle, for example, is listed as 1-6x24mm. Is the 24mm the outer diameter of the shaft?
Will both a 1" or a 30mm mount fit a 24mm scope?

 

[Wester]

The 1-6x24 Strike Eagle has a 30mm outer diameter tube. The 24 indicates the diameter of the objective lens.

A 1” scope mount is 25.4 mm so it will not work on that scope.

 

[Greenman]

Burris pepr

 

[thegrandpoohbah]

If you want something light weight go with one of the Aero Precision Ultralight mounts.