Ruger PC Carbine
- Thread starter wayupnorth
- Start date
- Status
Jonesyatpl
CGN frequent flyer
- Location
- Nanoose Bay, BC
Amazon.ca for a cheap ballistic nylon adjustable cheek riser.
I modeled a rail and 3D printed it. You can also go on Yeggi and see a lot of rails that could possibly work, you might have to drill your own holes.
It's a cheap a55 VISM or some such, a decent 300 lumen light with the worlds weakest green laser. I'll upgrade it.
My GF bought a PCC on a whim and after 250 rounds through it I’m really digging this rifle. Sand pit shooting a gong has been a blast with this little gun. Cheap on ammo and ran flawless with American eagle 124g. Super impressed with the shooting and with the simple takedown and cleaning the rifle looks very well thought out and made.
Anyone knows of a dealer bringing the in NR.
https://ruger.com/products/pcCarbine/specSheets/19116.html
https://ruger.com/products/pcCarbine/specSheets/19116.html
Pull back the bolt slightly with your right hand fingers while holding the receiver, twist on the barrel and then ease the bolt forward.... no need to lock it back.
Sucks that your bolt hold open is having issues but it's not needed to install and remove the barrel.
There's 3 of us shooting PC Carbines in our 3 gun league PCC division.
Ruger always wins. (cause there's only 3 of us in the div)
Not a problem on mine. Hit it harder?
Ruger always wins. (cause there's only 3 of us in the div)
Not a problem on mine. Hit it harder?
With the new parts painted black and a new label on the stock.
I could always re-print them in black for you. Got to watch the paint you use, the parts are printed in ABS and anything with acetone in it will melt the plastic a bit. I left mine red, makes it easier to find in a rack full of PC9's at IPSC PCC night.
I'm low tech, I used a Sharpie.
Love that flared mag well, I can swap mags like John Wick! Not...….
Jeez read every post. Waiting for my rifle. Got one for $749 out of the Tillsonburg Gun Shop. Will loctite all the screws down, thanks Stevo for posting this advice. I plan on mounting a Vortex Venum or Crossfire on he gun, add a sling and call it good. I have a Sub2K for a truck gun and a CX4 9MM for IDPA PCC. I am not sure if I will play the games with the Ruger..time will tell. Best thing about this gun is Turdo will leave it alone as he picks what evil guns he wants us not to have.
Who has the best pricing on aftermarket Glock mags. Recommendations. TDC is history so I can say this. I may have to break done and get a Glock 17 to pair up with the Sub2k and my new Ruger. Don't be surprised if the sun rises in the West tomorrow. :>).
On a side note a friend of mine in Oregon nailed a nuisance Black Bear three days ago with his SR9 pistol. Shot it using 124 gr. FMJ in the lungs. Bear ran 20 yards and collapsed. Not my first choice but suggests what the 9MM can do in a pinch.
Take Care
Bob
Who has the best pricing on aftermarket Glock mags. Recommendations. TDC is history so I can say this. I may have to break done and get a Glock 17 to pair up with the Sub2k and my new Ruger. Don't be surprised if the sun rises in the West tomorrow. :>).
On a side note a friend of mine in Oregon nailed a nuisance Black Bear three days ago with his SR9 pistol. Shot it using 124 gr. FMJ in the lungs. Bear ran 20 yards and collapsed. Not my first choice but suggests what the 9MM can do in a pinch.
Take Care
Bob
Yes I think its quite annoying..
Guy at snapshots the ruger warrenty center told me its normal......?? I think he's wrong...
- Status
