Anyone or company with stock of Anschutz 64 parts and experience?

[diopter]

Need ejector screws and possibly sears. Have a couple of club Cil 190s where the bolts come right out, sometimes don't ####, sometimes sear lets bolt uncock during closing.

 

[r204]

Try Nordic Marksman http://www.nordicmarksman.com/

 

[Rod B]

Talk to Peter at Target shooting products.

 

[lowe160]

I have had that problem with a couple of 190"s and it is usually the trigger screw to barrel being loose.


Just a thought.

 

[HKNova6]

+1 for site sponsor Nordic marksman

 

[diopter]

Talk to Peter at Target shooting products.

Peter is getting back to me on Monday.

 

[diopter]

I have had that problem with a couple of 190"s and it is usually the trigger screw to barrel being loose.


Just a thought.

Thank you for that lead.

At first I thought you meant the rear action screw was loose.

Once the action was out of the stock I wondered if the trigger stop prevented sear from engaging. Wrong tree.

Looked closer at the sear and saw that the rear of the trigger assembly had some play. Why?

Front of trigger assembly was held down by the ejector screw inside the action and a castle nut under the action. That was tight.
Then I notice the screw halfway in the trigger assembly going into the action. Loose? By 1/2 to 3/4 turn it was loose.

Tightened up that screw and bolt stays in the action like it should.

That screw in this download link Exploded view is #27 "Trigger Bracket Screw"
http://jga.anschuetz-sport.com/downloads/Ersatzteile/DE/ET_64_1966-01-01_DE.pdf?downloads