Modern Sporter - Build Discussions

wolfenrun said:
Which third party trigger do people recommend? I'm looking at either a Geissele Super 3 gun or some sort of Timney trigger. Cheers.
Click to expand...

Triggertech is having a 20% off sale right now. Today may be the last day on the sale.

I ordered a diamond trigger when it went on sale last. Been running it in my AR while I wait for my Sporter receiver set. Absolutely love the feel.
 
jiffx2781 said:
^^^ what he says.

I really like the Trigger Tech Adaptive. Has a shorter take up and shorter reset compared to the SSA-E but the cartridge type triggers are unnecessarily complex.

The SSA-E is a trigger you would trust your life with. Not so much with some of the others.
Click to expand...

I’m thinking of giving the SSP Flat face a try, any thoughts?
 
I have a Timney Competition 3lb Single Stage ( TT-667S) waiting for its home, starting to wonder if I made the right choice.
Anybody have any experience with this trigger?
 
Does any modification need to happen if I intend to buy a JP ENTERPRISES, 22LR BUNDLE, 18.00” BLACK TEFLON BARREL, BOLT CARRIER GROUP, CHARGING HANDLE, DUST COVER combo? I know you need to modify the CMMG version. Was wondering if you had to do the same for the JP version?
 
wolfenrun said:
Does any modification need to happen if I intend to buy a JP ENTERPRISES, 22LR BUNDLE, 18.00” BLACK TEFLON BARREL, BOLT CARRIER GROUP, CHARGING HANDLE, DUST COVER combo? I know you need to modify the CMMG version. Was wondering if you had to do the same for the JP version?
Click to expand...

I got a tactical solutions bolt and barrel that I'll be using. Post some updates when you put it together.

I wonder what's so special about the charging handle?
 
wolfenrun said:
Does any modification need to happen if I intend to buy a JP ENTERPRISES, 22LR BUNDLE, 18.00” BLACK TEFLON BARREL, BOLT CARRIER GROUP, CHARGING HANDLE, DUST COVER combo? I know you need to modify the CMMG version. Was wondering if you had to do the same for the JP version?
Click to expand...

Yes, slight mod needed. ATRS charges $50 to do it for you.
 
Qwerty1zer said:
I have a Timney Competition 3lb Single Stage ( TT-667S) waiting for its home, starting to wonder if I made the right choice.
Anybody have any experience with this trigger?
Click to expand...

I have one in my Stag-10, and I like it so far. Crisp break with little movement. I believe I will be putting one in my MS when it comes.
 
pac_man said:
What exactly needs to be modified on the CMMG or JP 22 kits?
Click to expand...

The JP requires a minor mod to the barrel (less intensive), basically it’s all down to reducing the size of these conversion kits as the sporter upper is slightly longer. You’ll notice the bolt carrier sticks out about 1/8th of an inch on a modern sporter. On the JP we machine a 1/8” deep recess into the barrel face where their guide rod moves. On the CMMG we build and install a custom block on the back of the carrier to hold their rod and spring, and then we can trim the plate at the back.

From Alberta Tactical
 
sphen said:
The JP requires a minor mod to the barrel (less intensive), basically it’s all down to reducing the size of these conversion kits as the sporter upper is slightly longer. You’ll notice the bolt carrier sticks out about 1/8th of an inch on a modern sporter. On the JP we machine a 1/8” deep recess into the barrel face where their guide rod moves. On the CMMG we build and install a custom block on the back of the carrier to hold their rod and spring, and then we can trim the plate at the back.

From Alberta Tactical
Click to expand...

Good to know, maybe I'll just send them my tactical solutions bolt and barrel when my receivers are ready.

Thanks
 
Without ruffling any feathers, or causing any sort of hysteria ;) does anyone know where things sit with production run #2? We're into September, I'm excited, and don't apologize for it lol. I figure there might be an eager beaver that's harassed ATRS and might have some insight on here? My serial number is in the 260's and can't wait to get this little boom boom stick and do some load development with her!
 
quikcolin said:
Without ruffling any feathers, or causing any sort of hysteria ;) does anyone know where things sit with production run #2? We're into September, I'm excited, and don't apologize for it lol. I figure there might be an eager beaver that's harassed ATRS and might have some insight on here? My serial number is in the 260's and can't wait to get this little boom boom stick and do some load development with her!
Click to expand...

It saddens me knowing were into September and the 200's haven't seen or heard anything yet.
I'm in the 400's, heres to hoping they're doing large batches!
 
Qwerty1zer said:
It saddens me knowing were into September and the 200's haven't seen or heard anything yet.
I'm in the 400's, heres to hoping they're doing large batches!
Click to expand...

When did you pre order? My understanding is that it’s based on chronological order date and not SN. I preordered in oct of 2018 but didn’t pay in full until May. So I’m in the 300’s but should
Be one of the first to get their receiver set.
 
You must log in or register to reply here.
Back
Top Bottom