I took my 300WSM and my 375 Ruger to the range the other day to do a final sight in check, and do a bit of off hand shooting.
I was walking out to check a 300 yard target (as I had forgotten my spotting scope) and took along my 375 Ruger,loaded wiht 270gr Factory loads, and 260gr Accubonds at 2750fps. I often take a rifle to practice quick offhand shots, shooting at various targets (often clay pidgeons) along the way.
Our gong is at 350 yards, and as I approached the 200 yard marker, I took an offhand shot at it, resulting in a very satisfying KERWHACK.
On the way back, I stopped again, and did the same. I stopped at 150 yards (200 yard shot) rested my hand angainst an uprigth, and whacked the gong a few more times. At the 100 yard targets I agian took a standing rested position on a post and whacked the gong a few more times, missing once. At 250 yards, there isn't much room for error!
Anyways, all along I noticed the gong didn't move too much with the impacts. (Sure it moved, but the thing is about 8" square, and 2" thick steel on very heavy chain)
Getting back to the firing line, I shot it with the 300WSM, 180gr TSX at 2950fps. THe gong REALLY moved. Like it bounced all over the place. Hititngit wiht the 375 produced the same results as before. Movement, but not nearly as much.
This probably doens't have much practical application relating to killing animals, but it was interesting to see the difference in 200fps and a different bullet construction on steel.
Anyone else find similar (or more interestingly- opposite- results)
I was walking out to check a 300 yard target (as I had forgotten my spotting scope) and took along my 375 Ruger,loaded wiht 270gr Factory loads, and 260gr Accubonds at 2750fps. I often take a rifle to practice quick offhand shots, shooting at various targets (often clay pidgeons) along the way.
Our gong is at 350 yards, and as I approached the 200 yard marker, I took an offhand shot at it, resulting in a very satisfying KERWHACK.
On the way back, I stopped again, and did the same. I stopped at 150 yards (200 yard shot) rested my hand angainst an uprigth, and whacked the gong a few more times. At the 100 yard targets I agian took a standing rested position on a post and whacked the gong a few more times, missing once. At 250 yards, there isn't much room for error!
Anyways, all along I noticed the gong didn't move too much with the impacts. (Sure it moved, but the thing is about 8" square, and 2" thick steel on very heavy chain)
Getting back to the firing line, I shot it with the 300WSM, 180gr TSX at 2950fps. THe gong REALLY moved. Like it bounced all over the place. Hititngit wiht the 375 produced the same results as before. Movement, but not nearly as much.
This probably doens't have much practical application relating to killing animals, but it was interesting to see the difference in 200fps and a different bullet construction on steel.
Anyone else find similar (or more interestingly- opposite- results)






















































