,,,,,,,,,,,,,,,,

[Fordtrucks]

......................,

 

[GUB]

Brownells

 

[Fordtrucks]

..............

 

[can14]

Yes

 

[lerch641]

Definitely handy to have those pliers, I've used them for AR castle nuts aswell.

 

[Anikin67]

Brownells for the castle nut pliers. Nordic Marksman has the shims.

 

[Fordtrucks]

Brownells for then castle nut pliers. Nordic Marksman has the shims.[/QUOTE
\,m,,,,,,,,,,

 

[walleyed99]

Or you could get some C clamp vise grips , and grab a dremmel and make yourself a set, easy to do. There's a sticky, or was a sticky under the M14 tab. I'll see if I can find it.

 

[Odd Shot]

Ask Tactical Teacher (CGN member) if he has any shims for sale.
Brownells for the pliers but the shipping cost bites

 

[ipscgraz]

I made a set of castle nut pliers from a cheap mastercraft (Can tire) welding C-clamp type vice grips. Trying to post pics, with no success.

Success!!! If I was going to do this again I would spend less time with a bench grinder and more time with a file, as they are pretty soft. Also you can see where one jaw is bent slightly (again, soft).

Total cost was about $15.00, and took maybe 15 minutes.

And don't forget to remove the tiny little set screw that locks the castle nut in place, or you may bend the jaw of your home made castle nut pliers.

 

[B]

The Brownells pliers are pretty soft. I forgot about the spot weld on the Norc FH and nearly wrecked mine immediately. My bad for going at it like a gorilla I guess.