Blackbox Customs Shadow 2

brit84

brit84

CGN frequent flyer
Rating - 100%
57   0   0
Location
BC
74209190_10162502049315092_8990699759916285952_o by https://www.flickr.com/photos/163757078@N08/, on Flickr

Recently received this Shadow 2 from Blackbox Customs. Stock Shadow 2 that has been cerakoted Red/Black/Grey and slide milled for a Leupold DPP.

Personal additions: Lok Grips, wide safety, JF Gunworks mag bases, light springs and comp hammer from Sebo Weapons

It has worked great with campro 147gr and Im now testing out some 158gr to compare optic bounce with.
 
it is nice an low, close to where I would be looking with irons but not co-witness low. Pointing/punching out the dot is naturally there
 
JayCarver said:
Curious to hear your thoughts on the 158s. Please share your load if you don’t mind also.
Click to expand...

3.2 hp38 1.100 ish should get me where I want to be 130pf.

3gn fell a bit short, just haven't had chance to re test in the last week and we are now at -30, 3gn also didn't eject well enough with a 9lb spring.

I'll also check accuracy once I'm closer to my pf.

147gn was 3.8gn hp38, gave 135pf
 
brit84 said:
3.2 hp38 1.100 ish should get me where I want to be 130pf.

3gn fell a bit short, just haven't had chance to re test in the last week and we are now at -30, 3gn also didn't eject well enough with a 9lb spring.

I'll also check accuracy once I'm closer to my pf.

147gn was 3.8gn hp38, gave 135pf
Click to expand...

Thanks, I wonder if N320 would be a suitable powder for the 158's...
 
Blastattack said:
158 grain? That’s cool. Are those actually .355 9mm bullets, or .358 .357/38 bullets? Very cool regardless.
Click to expand...

I'm actually testing with some berrys .358 bullets till I'm out, I have some campro 355 to test too and will buy those once I have a close load to go by.

Several shooters have been using the berry 358's for a while
 
You must log in or register to reply here.
Back
Top Bottom