I think some of them do for sure. I just don't know which ones to tighten and which ones to keep loose lol.
Happy New Year 2020! Norinco 1897 Trench gun Back in Stock! Only 299
- Thread starter Durhamoutdoors
- Start date
I think some of them do for sure. I just don't know which ones to tighten and which ones to keep loose lol.
hunterhenderson
CGN Ultra frequent flyer
give it a rest
AndyTacker
CGN Regular
- Location
- B.C.
I got 3 of those. And one a send right away for warranty exchange
Nestor
CGN Ultra frequent flyer
- Location
- too close to Calgary
What was wrong with it?
AndyTacker
CGN Regular
- Location
- B.C.
Mag was working and action is stuck. Seems something disconnect inside. And there is not available yet how to disassemble it.
Nestor
CGN Ultra frequent flyer
- Location
- too close to Calgary
AndyTacker
CGN Regular
- Location
- B.C.
Its totally stuck. I guess need to hammer now )))
Nestor
CGN Ultra frequent flyer
- Location
- too close to Calgary
I'm assuming (sorry as I am not trying to be a jerk) that you know how to use the slide release button (right side of the receiver)...do you? If it doesn't help, than yes. There is a problem. Cheers.
AndyTacker
CGN Regular
- Location
- B.C.
I think i try all of it, accept hammer )
Nestor
CGN Ultra frequent flyer
- Location
- too close to Calgary
Fair enough. Probably a screw getting loose on the bolt and locking it inside the receiver. I specifically asked the guys at the store to function check and inspect mine before sending it my way. Best of luck.
GUB
CGN Ultra frequent flyer
- Location
- West Kelowna B.C.
I do now.. Thanks
AndyTacker
CGN Regular
- Location
- B.C.
Most what was disappointing in Norinco 97 me it that, stock is not a wood.
Nestor
CGN Ultra frequent flyer
- Location
- too close to Calgary
Wow! What is your made of?
Mine has certainly a wood, just not a walnut.
They did apply some thick layer of poly on it though.
AndyTacker
CGN Regular
- Location
- B.C.
I check again 2 what i have now and yes one is made from wood. Second hard to understand. Maybe i should apologize for wrong information about the stock.
With the increase in shipping costs over the last few years, basic inspections before shipping should be standard practice these days..... nice to hear they accommodated you!
Nestor
CGN Ultra frequent flyer
- Location
- too close to Calgary
No need to apologize. I was just sincerely curious as to different variations within one batch of shotguns. I believe they were made last year as that's what indicates the factory inspection sheet. Can't read Mandarin, so the date is the only thing that I can tell. Wood on mine looks like Chinese catalpa. Which is a good news, because while very difficult to work with (I have some actual experience) it's highly resistant to mold or rotting. It's however soft, so it should be sealed properly.
GUB
CGN Ultra frequent flyer
- Location
- West Kelowna B.C.
My stock looks like MDF or particle board
Add glue to sawdust then pour into a mold
Or they had a block of MDF then shaped it like you would a regular stock
Just don't get it wet
Add glue to sawdust then pour into a mold
Or they had a block of MDF then shaped it like you would a regular stock
Just don't get it wet
Nestor
CGN Ultra frequent flyer
- Location
- too close to Calgary
GUB
CGN Ultra frequent flyer
- Location
- West Kelowna B.C.
When you take off the butt plate the debris from the screws spalls out then you can see the texture of the end and down the stock bolt channel
the weight and finish of the stock felt funny to me
the weight and finish of the stock felt funny to me
Parabellum08
Member
This video is horrible i dont buy one because of this video
