While you are on the site, in your browser find and click "Add to Home Screen" A CGN beaver app icon will then be created to your phone that is directly link to the site.
Note: This feature may not be available in some browsers.
I'm currently running a Bushnell Forge 3-18x50 in medium 30mm MDT Elite rings.
I just bought a 4.5-30x56 to put on this rifle and was curious if any one was using
MDT medium 34mm rings with a scope this size?
I have the MDT Elite rings in 34mm high on a Tikka CTR with the factory Tikka rail and a Delta Stryker 5-50-x56. To me it is too high, you should be able to run a medium set of rings on your scope, depending on the height of your rail.
I have the MDT Elite rings in 34mm high on a Tikka CTR with the factory Tikka rail and a Delta Stryker 5-50-x56. To me it is too high, you should be able to run a medium set of rings on your scope, depending on the height of your rail.
Thanks. I was eyeballing the 56mm to the 50mm on there now and was thinking I could get away with mediums. There's close to 1/4 in now between the bell and barrel.
