Door breaching Muzzle Device

[Greaves024]

I love my pistol grip deffender better for turning corners

 

[mebiuspower]

Someone say breaching shotgun?

 

[Boomer686]

Who makes that fore end???

Regards,

 

[CanAm]

Who makes that fore end???

Regards,

It's factory Remington for the police guns.

 

[Clobbersauras]

Someone say breaching shotgun?

That would look much better if there was a +1 on it, then you have an extra round to pump into the thug once you blow the lock and hinges off his door

Greentips I think an 8.5 with a +1 and breaching device would be almost perfect. Short and functional

 

[highspeedlowdrag]

Who makes that fore end

It's actually a Remington MCS shotgun forend. Not quite standard on the vanilla 870P's...

hsld.

 

[CanAm]

That would look much better if there was a +1 on it, then you have an extra round to pump into the thug once you blow the lock and hinges off his door

Greentips I think an 8.5 with a +1 and breaching device would be almost perfect. Short and functional

You want some clearance around the device due to blast.

 

[Clobbersauras]

isn't there enough out the top and sides? And there is some clearance beetween the bottom ports and the +1...should be fine I would think....

 

[Boomer686]

It's actually a Remington MCS shotgun forend. Not quite standard on the vanilla 870P's...

hsld.

You know the next question.... where can I get one???

Regards,

 

[gadget]

You know the next question.... where can I get one???

Regards,

Bad news Remington no longer sells the MCS forend separately, you can confirm that with arwenace who is also a Remington warranty center, anotherone of those strange twists of fate.

gadget

 

[Gargoyle]

Now I'm not all that familiar with metal tolerances and such, but couldn't you get a breaching device that threaded into a rem choke or similar choke thread?

 

[badboybeeson]

Now I'm not all that familiar with metal tolerances and such, but couldn't you get a breaching device that threaded into a rem choke or similar choke thread?

yes you can casey sell them.
bbb

 

[hunterhenderson]

new mossberg

milarm just got these in, mines on the way

 

[popcan]

Get the breecher / muzzle break from a Fabarm from TSE for 49 bucks or so, and have the end of your barrel threaded for it.

 

[Gargoyle]

does anyone have a link for where I can find one that fits the rem choke system?

 

[BRAMEL]

does anyone have a link for where I can find one that fits the rem choke system?

Contact forum member ARWEN ACE....he will be able to set you up with the proper choke and the breaching device. That's where I got mine.

 

[dannyair]

Dlask makes an awesome breach!

 

[fat tony]

There are some techniques to it but basically you got it! You put it right against the target, the teeth keep it from slipping.

The breaching attachment with the "V" groove in it that BRAMEL has, is also used for rebar cutting with special steel hollow point slugs.

Where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where where?

 

[fat tony]

I once had an apartment that had 2 front doors, an outer one that was just about ready to fall off the hinges and the inner one that you could also lock was a lumber core flush door with 2 hinges, the way it is was you went down a short corridor to the inner door and came up to the inner door which went up a steep flight of steps, as it was an old apartment it had a solid douglas fir jamb on the inside door, that swung outwards, if you were inside and someone wanted to get in he could kick at that door all day and not get anywhere, frigging hallway was so narrow, there is no possible way someone could generate enough force from a kick to do anything other than hurt themselves. course, a master key would make short work of it. I thought that if you had special drawbolts made up that went through the hinge leaves, even blowing the hinge with a master key would be of questionable utility.