MRA V1 458 SOCOM Bolt + Barrel Kits

Maple Ridge Armourer

Maple Ridge Armourer

CGN frequent flyer
MRA V1 458 SOCOM Bolt & Barrel Kits now available.

Retail: $599.95

SHOP NOW


MRA V1 Nitride AR-15 458 SOCOM Barrel

The Maple Ridge Armoury V1 Nitride AR-15 barrel is precision CNC machined in Canada from premium, GBQ 4140 CMV steel blanks. These button rifled blanks are lapped and stress relieved. Lapping is added quality assurance to minimize any tooling marks in the bore. The blanks are air gauge tested during final inspection to ensure the most exacting tolerances.
All V1 Nitride AR-15 barrel have precision cut chambers, gas ports, and an 11 – degree target crown. We use an Heavy profile to achieve an optimal balance between harmonic resistance , heat resistance, and weight savings. The 1/14” twist effectively stabilizes a wide range of common 458 SOCOM projectiles.
All Maple Ridge Armoury V1 Nitride AR-15 barrel undergo QPQ Black Nitride heat treatment. This heat treatment provides superior corrosion, wear, and abrasion resistance. Instead of adding material to the bore (like Chrome lining), Nitride treats the existing steel by imbuing nitrogen into the surface of the steel both inside and out. In this way, the Nitride process offers excellent accuracy potential.

AR-15 Barrel Specifications

Material: 4140 CMV Steel
Treatment: QPQ Black Nitride
458 SOCOM – 1/14” twist rate
6 groove rifled, honed, hand lapped, and stress relieved
11 degree target crown
11/16-24 muzzle thread
Precision cut chamber and gas port
M4 barrel extension with enlarged, single feed ramp
Gas Journal: .875″
Gas System:
18.6″ – Mid-Length
Weight:
18.6″ HVY –
Lifetime Warranty
Made in Canada


Toolcraft Nitride AR-15 458 SOCOM Bolt and Pins

Toolcraft probably makes more BCGs than any other manufacturer in the USA, and they are excellent quality. The company’s components are so reliable that many of the big USA gun brands will not bother making their own BCG, they simply order them from Toolcraft and add their own brand name.

The bolt is made from 9310 steel, a more modern tool steel compared to the classic carpenter steel. It is a nickel-chrome-molybdenum case-hardening steel, with good strength and toughness properties. It has high hardenability, high core hardness and high fatigue strength. 9310 steel is typically used in components with large cross sections requiring high toughness and core strength such as gears, crankshafts and heavy-duty gear shafts in aircraft and truck construction.

Bolt Specifications

458 SOCOM Bolt
458 SOCOM firing pin
Ready to drop in and go
Mil-spec
Phosphate finish
MPI inspected (and laser marked) bolt
Made in USA

SHOP NOW
 
Last edited:
So this just drops into any AR-15 receiver set? Nothing let to do but hold your balls while firing with one hand?

You think If we wait 3 weeks for the muzzle breaks and regulator gas blocks you will still have stock of the barrel/bolt combo? Doesn’t make sense to make 2 orders and pay shipping 2x

Nevermind just seen this on the site:

We have lowered the minimum order value from $300 to $100 to qualify for free, Canada wide, shipping using coupon code FREESHIP. If you have placed a store pick-up order prior to 24 March 2020 and you have not yet collected it, we will ship the order for free.
Click to expand...
 
LeadMonkey said:
So this just drops into any AR-15 receiver set? Nothing let to do but hold your balls while firing with one hand?

You think If we wait 3 weeks for the muzzle breaks and regulator gas blocks you will still have stock of the barrel/bolt combo? Doesn’t make sense to make 2 orders and pay shipping 2x

Nevermind just seen this on the site:
Click to expand...

Yes these will work in AR15 and similar type firearms.

I expect to be sold out of this run by the end of the weekend. I recommend ordering now to secure a barrel and bolt. We can hold the order until the other parts are ready and ship all at once.

Use the order notes to request the hold and coupon code for free shipping on the future parts order.
 
Holy crap, order in! :dancingbanana::dancingbanana:

I've had .458 SOCOM reloading components (Brass, bullets, powder, primers, dies, etc) since not long after I contacted Zach @ TNA about this at the beginning of 2019. He said not to jump the gun and but a bunch of stuff, as it could be a while. But I did anyways. I was kind of hoping I didn't spend more than a few hundred dollars on components for a caliber I'd never shoot, lol.

Just to clarify, the bolt "with pins" comes with the firing pin, cam pin, and firing pin retainer, yeah?

A buddy didn't believe me when I told him I finally had an oder in for a .458 SOCOM barrel that actually exists, haha. Thanks for doing this MRA :cheers:
 
Scotty454 said:
Holy crap, order in! :dancingbanana::dancingbanana:

I've had .458 SOCOM reloading components (Brass, bullets, powder, primers, dies, etc) since not long after I contacted Zach @ TNA about this at the beginning of 2019. He said not to jump the gun and but a bunch of stuff, as it could be a while. But I did anyways. I was kind of hoping I didn't spend more than a few hundred dollars on components for a caliber I'd never shoot, lol.

Just to clarify, the bolt "with pins" comes with the firing pin, cam pin, and firing pin retainer, yeah?

A buddy didn't believe me when I told him I finally had an oder in for a .458 SOCOM barrel that actually exists, haha. Thanks for doing this MRA :cheers:
Click to expand...

We are excited to finally bring these to market. Your gonna love it!
 
You must log in or register to reply here.
Back
Top Bottom