TROY Straight Pull Rifle

I dont know what is happening either with them,i did write them on the USA website asking for 2 parts to be imported and nothing,niet,nada respond.
 
I got a response regarding these rifles a little while back. They plan to have them in stock soon, but do not currently have an ETA.
 
Max Owner said:
Call.

They are busy. This I know from my own order.
Click to expand...

I have tried calling, no answer. I know from previous experience, just keep posting they will eventually get back to me. I have bought 4 or 5 firearms and other assorted parts and have had this problem a few times, but enjoy dealing with them, so I give them first choice, if they don't get back to me i will just buy from someone else
 
They had one or two on their site yesterday in 556 (it MIGHT have been the PAR version I don’t remember). They do get them in but they are a hot commodity right now.

I grabbed a PAR in 308.
 
I’ve never received a reply from irunguns (email or phone) several times over the last few years and haven’t bothered trying to order anything in the event I’d ever need customer service.
 
Paul_1982 said:
They had one or two on their site yesterday in 556 (it MIGHT have been the PAR version I don’t remember). They do get them in but they are a hot commodity right now.

I grabbed a PAR in 308.
Click to expand...

I had a PAR when they first came out and hated the rifle, maybe is was just because 308 but extremely hard to cycle, had to hold the pump and hit the butt stock on the table to eject the fired brass, sent it back and received a 338 Federal instead, same issue. I know this was a problem, on the internet people were getting chamber reamers and re cutting the chamber, some said it solved there problem
 
Curtis264 said:
I had a PAR when they first came out and hated the rifle, maybe is was just because 308 but extremely hard to cycle, had to hold the pump and hit the butt stock on the table to eject the fired brass, sent it back and received a 338 Federal instead, same issue. I know this was a problem, on the internet people were getting chamber reamers and re cutting the chamber, some said it solved there problem
Click to expand...

Mine did not have this problem. What kind of ammo were you feeding it? Mine cycled just fine, in fact, I’m really missing it these days. F764FAD8-4AB8-478C-B1FF-D0D3C9938E69.jpg
 

Attachments

  • F764FAD8-4AB8-478C-B1FF-D0D3C9938E69.jpg
    F764FAD8-4AB8-478C-B1FF-D0D3C9938E69.jpg
    133.7 KB · Views: 810
Uisge said:
Mine did not have this problem. What kind of ammo were you feeding it? Mine cycled just fine, in fact, I’m really missing it these days.View attachment 384503
Click to expand...

Factory Federal and reloads, all had the same problem, even tried a small base 308 die, some people said it was because of the fluted chambers, maybe I was unlucky and bought the only two with problem, but as I said other were having problems as well
 
Curtis264 said:
Factory Federal and reloads, all had the same problem, even tried a small base 308 die, some people said it was because of the fluted chambers, maybe I was unlucky and bought the only two with problem, but as I said other were having problems as well
Click to expand...

Interesting, mine was not hard to cycle at all. Could be a bad chamber, or maybe something to do with the slide release, I switched mine out with a spring from a pen (of all things, it fit perfect and worked great) as the slide release was a little too stiff for my liking. One of the first things I did, perhaps the hammer wasn’t enough to fully release the slide? Come to think of it, my buddy had a 338 version and it worked fine too, also received the pen spring mod.
 
You must log in or register to reply here.
Back
Top Bottom