Looking to have a cylinderbore 20ga threaded for chokes

[gh_defiant]

I have an older 20 gauge I would like to have threaded for chokes. Looking for anyone that can do the work?

Thanks

Graham Hudson

 

[peterf]

Precision Arms in King City, Ontario is doing a sxs for me. It's a 12 gauge though so you may want to contact them to see if they do 20's.

 

[FLHTCUI]

I have an older 20 gauge I would like to have threaded for chokes. Looking for anyone that can do the work?

Thanks

Graham Hudson

Briley thin walled chokes............
Asking who does them in Canada is way above my Pay Grade.
Rob

 

[peterf]

Briley thin walled chokes............
Asking who does them in Canada is way above my Pay Grade.
Rob

Precision Arms is putting Briley thin walled chokes in my sxs. I am guessing it will come to about 5 or 6 hundred total. It's worth it for a quality shotgun that fits me well.

 

[DANS40X]

Google & Call 4D Reamer Rentals in MT.USA to see if they have the tooling to rent/send to you for the choke thread that you desire.

The process could be accomplished by hand,but a lathe would be much faster.

The reamer w/ bushings & tap/facing tool fee is approximately $60 USD for a 10day turn around,unless needed for a longer duration.

Return shipping is on your dime.

 

[marshall]

There is a shop in Saskatoon that has a 12ga setup, I don't think a 20. also depends on the thickness of the barrels