MRA Renegade Rifles, Parts, and Kits now available

[Maple Ridge Armourer]

Could you make a double-end torque rod to work with both 5.56 and .308?

We already have these in stock for AR-15 and AR-10.

We will release the MRA V1-B next then when we release our MRA X1-B (308) receiver set, we will have MRA X1-B rods and double ended MRA V1-B and MRA X1-B rods.

 

[old303]

Wondering if a long-barrel profile with no gas port (and therefore no need to have the blocker hanging onto it, or any need for the profile to change there) might make sense with this receiver, for really reaching out to distance.

 

[Maple Ridge Armourer]

Wondering if a long-barrel profile with no gas port (and therefore no need to have the blocker hanging onto it, or any need for the profile to change there) might make sense with this receiver, for really reaching out to distance.

Yes. We are making taper profile barrels up to 20" long for these. A selection of barrels will be available as soon as we begin shipping the receiver sets.

 

[correctaccount]

Any idea if these could be used for a .22 LR build?

 

[Maple Ridge Armourer]

Any idea if these could be used for a .22 LR build?

Anything is possible. We will look into it.

 

[TheCyaba]

Any idea if these could be used for a .22 LR build?

You could probably slap a cmmg kit into it. The cmmg will function in a Troy par so most likely will in this to

 

[Curtis264]

You could probably slap a cmmg kit into it. The cmmg will function in a Troy par so most likely will in this to

CMMG kit is the same diameter as the AR-15 bolt carrier, and AR-15 bolt carrier will not fit into this upper receiver

 

[mdbuckle]

CMMG kit is the same diameter as the AR-15 bolt, and AR-15 bolt will not fit into this upper receiver

It is the carrier that is different on this receiver. It takes any ar15 bolt...but the CMMG kit will not work as this receiver is side charging...

 

[Curtis264]

It is the carrier that is different on this receiver. It takes any ar15 bolt...but the CMMG kit will not work as this receiver is side charging...

According to MPA the upper receiver is smaller than a standard AR-15 and a AR-15 bolt carrier will not fit, the CMMG is a carrier and bolt all in one, and since it is made to fit a standard AR-15 upper it will be to large to fit in this upper

 

[pzkmpfw14]

This is a long shot, but would you be making barrels without gas ports in gov't profiles? I would looooove to do some kind of M16 clone with the front sight gas block that I now have laying around. You already have my business, but I would give you my love <3

 

[TheCyaba]

CMMG kit is the same diameter as the AR-15 bolt carrier, and AR-15 bolt carrier will not fit into this upper receiver

Ahhh very good no idea what the specs are on these I was surprised when it worked in the par figured it may on this to

 

[BKnill1]

How is the development process going? From previous posts it sounds like you have finished all the R&D and are at the production phase. Any update on progress (e.g. completing first test build/minor tweaks) or pics of the firearm yet?

 

[MJS]

Hey guys,any chance you would consider making a 1913 stock adaptor that would fit on this rifle?

 

[Curtis264]

Hey guys,any chance you would consider making a 1913 stock adaptor that would fit on this rifle?

How would you make that work with a buffer tube?

 

[MJS]

How would you make that work with a buffer tube?

I was thinking this didn’t use the buffer for the spring assist,but looking closer it appear it does,so yeah, wouldn’t work.

 

[Maple Ridge Armourer]

***Production Update***

First run of carriers done.





First Op on lowers running now.

 

[scourge18a]

Beauty

 

[TheAcetaminophen]

looks nice actually

 

[SparkOfLight]

I am really looking forward to these!

 

[Geoff B]

Do you think the August delivery date is still good to go?