Barrels for TRG-22?

[M.w.wolf]

Wondering if anyone knows a vendor that sells replacement barrels for a Sako TRG-22?

Considering swapping out the 308 for 6.5.

 

[twosmokinspades]

Most gunsmiths can chamber a barrel. For the TRG. I did a few for a friend.

 

[rugbydave]

Most gunsmiths can chamber a barrel. For the TRG. I did a few for a friend.

I hear anything other than .308 doesn't feed so great from the mags

 

[twosmokinspades]

I hear anything other than .308 doesn't feed so great from the mags

Yes and no. Needed to up grade the spring and not use a 115 dtac seated out as far as possible. I think I would also help not to have a flat breach face, but rather a 15 degree???? Face similar to what Defiance does to help guide the bullet in. I am yet to try that. Maybe do it on the next barrel

 

[Tikka223]

Same mags as the T3 CTR which is sold in .308 and 6.5. I suspect they will feed just fine.

 

[rugbydave]

Yes and no. Needed to up grade the spring and not use a 115 dtac seated out as far as possible. I think I would also help not to have a flat breach face, but rather a 15 degree???? Face similar to what Defiance does to help guide the bullet in. I am yet to try that. Maybe do it on the next barrel

You talking about the Deviant Elite? I agree, that coned breach probably helps, mine feeds like butter.