11mm Dovetail to Rail with 20MOA
- Thread starter AnotherCanuck
- Start date
Then you will have issues at closer range. Get one of these; with a .22 LR elevation knob. I have one with the .17 knob on my 17 HMR; love it. The .17 adjusts from 100 - 300 yards; not sure of the range on the .22 one. It is right on, and returns to 100 yard zero when you dial it back. Very clear scope, and I got mine on sale from SFRC during a sale a while back for about $200.00 Transferable life time warranty, and the distributor/warranty center is in Canada.
They also have a more powerful scope with Paralax adjustment and 44 mm optical for about $100 more. 6 x 16.
There are available canted rails that will give 20 MOA or 30 MOA elevation. There are varieties that can be attached to the 11mm grooves. If the dovetails on your rifle are similar to those on Anschutz rifles you could look for Anschutz rails. You will have to use Weaver (or Picatinny) style rings.
Any idea who sells them?
Mystic Precision
CGN Ultra frequent flyer
- Location
- Summerland, BC
Annie rails are not a drop in fit... Friend has to tweak his rail to fit his Scorpio.
I modified the action and fit a CZ452 20 MOA rail on it.... both rail and action needed to be modified but it worked out very nicely.
Another approach is to get a generic clamp on weaver base and they use Burris SIG ZEE rings.
PM or email if you would like to get some stuff.
Thanks
Jerry
I modified the action and fit a CZ452 20 MOA rail on it.... both rail and action needed to be modified but it worked out very nicely.
Another approach is to get a generic clamp on weaver base and they use Burris SIG ZEE rings.
PM or email if you would like to get some stuff.
Thanks
Jerry
Attachments
This will work. You will need the offset inserts that go with the Burris Signature Zee rings. The inserts that come with the rings are 0 (zero) offset.
With the offset inserts, you can adjust for elevation and windage.
Mystic Precision
CGN Ultra frequent flyer
- Location
- Summerland, BC
Booking EGW next week if anyone is interested... I just don't think it will be a drop in fit vs what I have seen in fitting my CZ452 rail.
But it is available.. and can be modded if needed.
Jerry
Doing a bit of google-fu I think that's a winner, and I PM'd you. Thank you!
- CZ 457
- Area 419 30 MOA Base for 11mm receiver dovetail
- Burris XTR Signature 1.25" 30mm Rings, +20 bottom rear, -20 top rear. To center my windage I did +10 at 9 o'clock and -10 at 3 o'clock.
- CCI SV at 1059 fps from my 16.5" Lilja barrel and a 50 yard zero I have a total of 66 MOA UP and 1 MOA DOWN. Plus 36 MOA of reticle holdover.
More than what I need as I have only 300 yards in my back yard, for now. But rather have it and not need.
Paid $137 free shipping for the Burris rings from a place in Guelph, Ont.. PM me for the name of the place if you're interested. Not a site sponsor but great place to deal with. Area 419 base from Go Big Tactical.
Cheers
Last edited:
That's a nice setup bud! I'm very jealous of your adjustable cheek riser. Once you get the rail adapter on, even with medium rings I have a chin weld.
