MRA Renegade Rifles, Parts, and Kits now available

[Maple Ridge Armourer]

Can you provide more details on the barrels? Lengths, profile weight, availability, etc.? Will these be available with the receiver sets?

We are producing several hundred Renegade barrels right now in 14 different configurations for 223 Wylde. These will be available at the end of August. We will be producing 300 BLK, 7.62x39, 6.5 Grendel, 458 SOCOM, 450 Bushmaster, and 6mm ARC throughout the remainder of 2020.

Here are the following features available in the upcoming 223 Wylde barrels.

Materials: GBQ CrMov or GBQ 416R SS
Finish: QPQ Nitride for CrMov, Polished SS, or Bead Blasted SS
Lengths: 12.5", 16", or 19"
Profile: Chamber OD 0.980" steps down to 0850" straight taper to 0.750" muzzle. Full body, straight flute, or spiral flute available.
Muzzle: 11 degree target, 1/2" x 28tpi thread
Weight: TBD but estimated to be similar to our other barrels of the same length

Accuracy Guarantee and Lifetime Warranty.

 

[Maple Ridge Armourer]

Also interested, without trying to open a can of worms, when MRA thinks production will catch up to pre-sales? I.E. see this as an on-the-shelf offering? Any time in the forseeable future?

Understood, if they don't want to answer.

No worries. We expect to stock dealers with inventory of complete Renegade rifles, complete Renegade receiver groups, and supporting Renegade parts and tools by mid September.

 

[45ACPKING]

We are producing several hundred Renegade barrels right now in 14 different configurations for 223 Wylde. These will be available at the end of August. We will be producing 300 BLK, 7.62x39, 6.5 Grendel, 458 SOCOM, 450 Bushmaster, and 6mm ARC throughout the remainder of 2020.

Here are the following features available in the upcoming 223 Wylde barrels.

Materials: GBQ CrMov or GBQ 416R SS
Finish: QPQ Nitride for CrMov, Polished SS, or Bead Blasted SS
Lengths: 12.5", 16", or 19"
Profile: Chamber OD 0.980" steps down to 0850" straight taper to 0.750" muzzle. Full body, straight flute, or spiral flute available.
Muzzle: 11 degree target, 1/2" x 28tpi thread
Weight: TBD but estimated to be similar to our other barrels of the same length

Accuracy Guarantee and Lifetime Warranty.

please consider .338 federal when you guys are able to get the larger frame model on the table.
cash in hand for the big boy version

 

[jjuice]

Any idea if these could be used for a .22 LR build?

id pay the big bucks for a fun .22 trainer again. has there been enough interest to justify this going anywhere?

 

[Dexter Morgan]

I know you guys are busy right now.
But possibly in the future you could add this style of charging handle as an option.

I see this style of handle used a lot in UK shooting videos.

 

[Maple Ridge Armourer]

I know you guys are busy right now.
But possibly in the future you could add this style of charging handle as an option.

I see this style of handle used a lot in UK shooting videos.

You bet!

We are working on a few different charging handle styles including one similar to this.

The cylinder handle is the most economical to run so it is being included with the kit by default.

 

[Helka]

11 days and counting...I may or may not be super excited

 

[Sunchild2071]

No worries. We expect to stock dealers with inventory of complete Renegade rifles, complete Renegade receiver groups, and supporting Renegade parts and tools by mid September.

That is great news. I'll be happy to have one in hand, as opposed waiting for a confirmation email for a pre-order, if it comes down to that. Mid Sept. is not a long way off.

 

[STEELCITYSLICKER]

Hi there,

Any update on the "reaction rod" that you had mentioned would be available for purchase?

Thanks!

 

[Sqr]

I know you guys are busy right now.
But possibly in the future you could add this style of charging handle as an option.

I see this style of handle used a lot in UK shooting videos.

I never would of thunk it when Canadian gun laws would be worse then the UK. Was that a five round mag?.............

 

[Cal45]

I never would of thunk it when Canadian gun laws would be worse then the UK. Was that a five round mag?.............

Ours are worst now (except for handguns) since they are allowed supressors..

 

[stevey3737]

At reason why this couldn't use 20 or 30 round magazines?

Yes because those mags are prohib here

 

[Dexter Morgan]

" I never would of thunk it when Canadian gun laws would be worse then the UK. Was that a five round mag? "

UK does not have any magazine restrictions that I'm aware of.

 

[Ramnon]

Hi there,

Any update on the "reaction rod" that you had mentioned would be available for purchase?

Thanks!

Waiting on this as well. I’m also hoping to pick up an .875” gas journal seal as soon as they become available.

 

[Fisselig]

Ours are worst now (except for handguns) since they are allowed supressors..

We're also worse because we can't even have AR-10s anymore. Hoping the OIC will be thrown out.

 

[BKnill1]

So we are getting down to the wire on that August 31 deadline. Any updates? Still on track?

 

[Dmitri]

So we are getting down to the wire on that August 31 deadline. Any updates? Still on track?

+1.. i would also like to know.. thanks.

 

[rifleman338]

I'm in on the second run, but any information would be great.

 

[Ramnon]

So we are getting down to the wire on that August 31 deadline. Any updates? Still on track?

The suspense is killing me. Crossing my fingers hoping I’m in the first shipments.

 

[Maple Ridge Armourer]

UPDATE:

We are delaying delivery by approximately 2 weeks.

All packaging is prepped, bottom metal, carrier, and small parts are complete and ready.

I was not happy with the surface finish of the receiver and it has taken us longer than expected to get the part perfect. Then we ran into some issues getting the program stable so we can run 24/7 mass production.

Now, I am happy to report the receiver program is running smooth and we are running 24/7 plus we are putting a second machine on the receivers later next week which will double our output to around 60 receivers a day.

I apologize for the delay but it was a matter of honour and pride in our work. I could not in good conscience deliver a subpar product just to meet an estimated timeline.

At the current rate of production, we will be able to deliver all Aug31 preorders by mid September and all Sept30 preorder on time.

Thank you for your understanding.