GLOCK Replacement Parts

hillbillyscatter said:
have the parts already come and gone or are you still working on stocking your website?
Click to expand...

Cocked&Locked said:
That is what I had asked in an email to them. No reply as of yet.
Click to expand...
Did neither of you click on the photo in the first post? The one they specifically said links to their website with all the GLOCK parts they have?

I see them all:
L9BKugb.jpg
 
Xero said:
Did neither of you click on the photo in the first post? The one they specifically said links to their website with all the GLOCK parts they have?
Click to expand...

Yes, I did.
I don't see any of the out of stock parts changing status from weeks ago. Still out of stock now. So that's why I asked.
 
Cocked&Locked said:
Yes, I did.
I don't see any of the out of stock parts changing status from weeks ago. Still out of stock now. So that's why I asked.
Click to expand...

+1 there are many products that have not been restocked
I bought the last Gen5 33774 extractor and it has not been restocked, same goes for other Gen5 parts I have been looking for (EXTRACTOR DEPRESSOR PLUNGER 9MM GEN5)
 
Hey guys, sorry for not getting in here sooner.
Our Glock order was delayed, at least the majority of it. I will follow up tomorrow to see where it is. I’m assuming we should see it any time.

Everything except a few SKU’s are supposed to be inbound.
 
No factory Slides or Barrels. Glock in Canada will no longer bring them in for retail sales. Any requests for factory barrels must be placed directly with Glock.
 
how many rds through my g17 gen 4 till i should replace recoil spring or just wait till slide starts to tell me? around 2100 at the moment.
 
shifty01 said:
how many rds through my g17 gen 4 till i should replace recoil spring or just wait till slide starts to tell me? around 2100 at the moment.
Click to expand...

Most guys change springs out between 3-5000k but some just wait for a problem to occur such as FTF/FTE's

Glock Recommends:
Gen3 - 2,500 - 3,000 rounds
Gen4 & 5 - 4,500 - 5,000

It’s important to remember that racking the slide is the same as firing with regards to the RSA, so it’s not just rounds fired.

Obviously, springs are very important in the proper operation of your pistol and as they age or "tire" they can affect the operation and lead to unsatisfactory performance.
Running worn springs my not cause malfunctions, but can cause battering and premature wear and eventual breakage. It's an inexpensive maintenance item.

Hope this helps
 
Nordic Marksman said:
Most guys change springs out between 3-5000k but some just wait for a problem to occur such as FTF/FTE's

Glock Recommends:
Gen3 - 2,500 - 3,000 rounds
Gen4 & 5 - 4,500 - 5,000

It’s important to remember that racking the slide is the same as firing with regards to the RSA, so it’s not just rounds fired.

Obviously, springs are very important in the proper operation of your pistol and as they age or "tire" they can affect the operation and lead to unsatisfactory performance.
Running worn springs my not cause malfunctions, but can cause battering and premature wear and eventual breakage. It's an inexpensive maintenance item.

Hope this helps
Click to expand...

For a 19x that's getting close to 4k rounds, aside from the dual spring assembly and trigger spring, what else should I look to add to an order to be ready for eventual breakdowns. Firing pin?
 
You must log in or register to reply here.
Back
Top Bottom