MRA Renegade Rifles, Parts, and Kits now available

[old303]

Made it out to the range, rifle shot fantastic, was just breaking in barrel, so I took the rifle apart 3 times. First 15 shots were difficult to extract and after that is has been getting a lot better. Shot about 50 rounds through barrel, last 10 rounds were very easy to extract

I was noting difficult extraction too. Does it seem to be a new-rifle issue that gets better? I was thinking to clean the chamber, but this rifle is harder than most to open up for cleaning and I didn't have the tools and stuff at the range with me.

So long as I can haul the bolt back normally I'm happy, but when it gets to the point of having to drop the mag, lay the rifle down on its side on the bench, brace stock against belt, and haul back on the bolt with both hands the fun has sort of gone out of the new toy.

Maybe this is a rifle for being less of an anti-boresnake purist? Still need some way of holding the bolt back though.

And maybe I'll have to find some other way of getting rid of the bargain Russian ammo.

Do we have a checklist of what to do about difficult extraction?

 

[Sqr]

I was noting difficult extraction too. Does it seem to be a new-rifle issue that gets better? I was thinking to clean the chamber, but this rifle is harder than most to open up for cleaning and I didn't have the tools and stuff at the range with me.

So long as I can haul the bolt back normally I'm happy, but when it gets to the point of having to drop the mag, lay the rifle down on its side on the bench, brace stock against belt, and haul back on the bolt with both hands the fun has sort of gone out of the new toy.

Maybe this is a rifle for being less of an anti-boresnake purist? Still need some way of holding the bolt back though.

And maybe I'll have to find some other way of getting rid of the bargain Russian ammo.

Do we have a checklist of what to do about difficult extraction?

That should be a start.

 

[Maple Ridge Armourer]

OUr Cylinder Charging Handles are now available!

This charging handle is intended for the use with the Maple Ridge Armoury Renegade Bolt Carrier. This can be mounted on either the Left or Right side.

Includes:
1x Cylinder Cocking Handle
1x Screw
2x Dowel Pins

Retail: $39.95

 

[Sqr]

Why separate charge handle sales? Is this different over the provided item or are individuals losing them?

 

[RK99]

Why separate charge handle sales? Is this different over the provided item or are individuals losing them?

I think it's mainly for those wanting a handle on both sides simultaneously.

 

[Sqr]

I think it's mainly for those wanting a handle on both sides simultaneously.

Never thought that of that.......not for me but what ever floats your boat.

 

[Maple Ridge Armourer]

Renegades now in stock and available to order and ship.

 

[Exlibris]

Renegades now in stock and available to order and ship.

Complete rifles or still just the builder kit?

 

[rifleman338]

Are the complete upper receivers ready to go yet?

 

[Maple Ridge Armourer]

Complete rifles or still just the builder kit?

Rifles in 2 weeks

 

[Maple Ridge Armourer]

Are the complete upper receivers ready to go yet?

Receivers and Complete Receiver kits early next week

 

[AbHobbyist]

Any ETA on

A-2 stock adapters?

Better bolt handles?

 

[Maple Ridge Armourer]

Any ETA on

A-2 stock adapters?

Better bolt handles?

I think we have a solution for the A2 stocks. Testing soon. Charging handles to follow.

We need to hire more staff! No enough man hours to do everything we need to do!!!

 

[Kingjenky]

What’s the projected cost for one in 458Scm

 

[Maple Ridge Armourer]

What’s the projected cost for one in 458Scm

Between $1500 and $1700 depending on barrel length.

 

[Maple Ridge Armourer]

OK we have a small run of a wide variety of Renegade parts.

MRA Renegade Receiver and End Plate


MRA Renegade Complete Upper Receiver Kit


MRA Renegade Bolt


MRA Renegade Barrels



MRA Renegade Cylinder Charging Handle

 

[Kamikaze11]

More bottom metal coming soon ?

 

[Maple Ridge Armourer]

More bottom metal coming soon ?

Yes those are now in stock also.

 

[700-223]

I think we have a solution for the A2 stocks. Testing soon. Charging handles to follow.

We need to hire more staff! No enough man hours to do everything we need to do!!!

This is the right problem to have - congratulations!

 

[S-357]

Ok so! I want a close in bush gun for deer. With collapsible stock what is the shortest barrel one can run on the renegade? Also i havent decided on chambering it in .458 soccom or 450 bushmaster. Barrel availability? Any info would be great!