Torque wrench - 8mm to 1/4 bit adapter?

[sillymike]

OK, seems like my Google-fu is not up to par... My old pocket-size torque wrench gave up the ghost... So instead of going out shopping for a new one, I figure I could use my Anschutz 4405 I have sitting in my "match" shooting box.

Never really noticed before, but the thing use a 8mm hex bit.
- All my screw driver/allen bits are 1/4

So I'm trying to find something like this, to go from 8mm hex to 1/4. Does such beast exist?
- Or will I have to make my own?

 

[zuke]

I'm thinking this



https://www.ebay.ca/itm/Magnetic-Dr...813146?hash=item3db4696d1a:g:1ZAAAOSwNM9gBrLU

 

[sillymike]

Kind of, but reversed.
- The hex bit needs to be 8mm and the socket part need to 1/4"

 

[dogzilla]

Shouldn’t be too difficult. 8mm is essentially 5/6” and a lot of the hand type impact wrenches use 5/16 bits . I would bet Can tire or Princess auto would have them. If you’re going to google you would get more results googling 5/16 as opposed to 8mm. There is only about.003 difference

 

[sillymike]

Shouldn’t be too difficult. 8mm is essentially 5/6” and a lot of the hand type impact wrenches use 5/16 bits . I would bet Can tire or Princess auto would have them. If you’re going to google you would get more results googling 5/16 as opposed to 8mm. There is only about.003 difference

Thanks for the tip! Just found this
- Wera 052625 Universal 1/4" Bit Holder - 5/16" Hex Drive