Recoil and the brobee...

[agit-prop]

I just had an epiphany.

What if...

- Take an AR15 carbine buffer tube and mill 1/4" slot lengthwise in the top and bottom, matching the length & location of the blind slot already present for the carbine stock's detente pin.
- Take the stock, remove the detente pin, and drill a hole in the top of the stock in line with the detente pin hole.
- Take a 1/2" thick aluminum disk that is 1" in diameter and drill a 1/4" hole radially through it
- place the disk inside the buffer tube, aligning the hole in the disk with the slots in the top and bottom of the buffer tube
- insert the buffer tube into the plastic stock
- run a 1/4" stove bolt through the stock, the buffer tube, and the aluminum disk, and secure at the bottom of the stock with a nylon locking nut.
- install a 1" diameter spring into the buffer tube
- screw the buffer tube onto a brobeeized 12 gauge

I wonder how long that would last...

 

[badboybeeson]

thats alot of work when for $140 you can just by a Endine hydraulic buffer available from Mesa Tactical fpr the M4 stock.
we plan to brign them in for the brobee stock adaptor.
But i will say you really dont need it out slave guns are 14" barrles with breeshers and magpull stocks, it fits so well i find recoil not a problem at all.
bbb

 

[Snausages]

$140 you can just by a Endine hydraulic buffer available from Mesa Tactical fpr the M4 stock.
we plan to brign them in for the brobee stock adaptor.

Do you have a timeline for the Mesa Tactical buffer?

 

[badboybeeson]

Do you have a timeline for the Mesa Tactical buffer?

no nothing yet
we will be selling them with our stock adaptor,listed one our website when we get them.
contact casey at tac ord he brings in alot of the Mesa stuff.
bbb