Fabarms-Rem870 Knoxx stock adaptor prototype finish!! Lots of pics
- Thread starter badboybeeson
- Start date
- Location
- East ontario
the issue with adaptors for other semi auto guns is the tube that runs from the back of the frame into the butt stock, some semi guns do not use that system , so we can do stuff for that.
I think knoxx have a stock system for the Bennilli no??
Not that i have found that they need kind of recoil system.
bbb
I think knoxx have a stock system for the Bennilli no??
Not that i have found that they need kind of recoil system.
bbb
Actually I'm thinking the sling mount, and the long rail/AR stock adaptor on a benelli would be pretty cool. 
BTW my HP9 has the sling mount, and anaconda breachers sling, and even thought I didn't see any grouse this year, it made for a comfortable hike with the shotgun. The sling mounts works like a dream.
Thanx for providing these great products.
BTW my HP9 has the sling mount, and anaconda breachers sling, and even thought I didn't see any grouse this year, it made for a comfortable hike with the shotgun. The sling mounts works like a dream.
Thanx for providing these great products.
- Location
- East ontario
Actually I'm thinking the sling mount, and the long rail/AR stock adaptor on a benelli would be pretty cool.
BTW my HP9 has the sling mount, and anaconda breachers sling, and even thought I didn't see any grouse this year, it made for a comfortable hike with the shotgun. The sling mounts works like a dream.
Thanx for providing these great products.
we will for sure be making sling mounts for the Bennilli as well as the mossberg, just have to get this project off the ground 1st.
The sling adapter might help the Mossberg quite a bit, I was busy last night taking the sharp edges off of my Spec-Ops stock as they were killing my finger while operating the Action lock release. The extra space there might help quite a bit.
- Location
- East ontario
well i have 2 knoxx stocks
one did indeed have some sharp edges from the molding, i just took a small file to it.
The issue i fount was more to do withthe spec on the casting/ mold thers is about 20-50thu difference in the 5 different knoxx stocks i eather own or have played with, not a big deal its just if you find your stock a little tight or a little lose that may be why.
Stll a very well made bit of kit.
I have my marine magnum with one of our nickle plated 870 single point sling plates on it and it sure does feel nice
bbb
More of an issue of having a bunch sharp edges around the control which you have to sort of fumble for. On a regular stock the Mossberg controls are great, with the Spec-ops stock they are a pain, however I will live with it as I really enjoy shooting the gun now with the stock. I will post a thread on my installation and modifications.
Can you tell us anything more regarding this? I'm intrigued...
- Location
- East ontario
me too if you have any info at all i could look into
- Location
- East ontario
Yenner
well we had to make a call and as most are RH shooters we went with the loop on the LH side.
But if your useing a Knoxx M4 style stock it does not get in the way.
I have a customer the left handed and runs around 380-390lbs depending the time of day
His hands are really think and he did not find that the Loop got in the way.But as for the single point sling use for LH shooters its a no go for now.
Alot of work was put into this and doing a LH model at the same time just was not going to work out.
If intrest is high then we will work on it.
we do offer an Ambi single point sling mount for the Fabarms allready
See is hear www.sjhardware.com
Allso can be had at most of the big gun dealers in canada
a small list of CGN dealer that have them is stock
[FONT=Helvetica,Arial,sans-serif]www.theshootingedge.com[/FONT]
[FONT=Helvetica,Arial,sans-serif]www.oneshottactical.com[/FONT]
[FONT=Helvetica,Arial,sans-serif]www.target-sports.com[/FONT]
[FONT=Helvetica,Arial,sans-serif]www.p-d-ent.com[/FONT]
[FONT=Helvetica,Arial,sans-serif]www.ellwoodepps.com[/FONT]
[FONT=Helvetica,Arial,sans-serif]www.davesarmysurplus.com[/FONT]
[FONT=Helvetica,Arial,sans-serif]http://firearms.ca/contacthsg.html[/FONT]
[FONT=Helvetica,Arial,sans-serif]www.tacord.com[/FONT]
- Location
- East ontario
hi guys
just wanted to show you some pics of the finished item
specs
cnc milled from 7075 alum
Type III mil spec matt anodized
cnc milled 416 stainless steel nut
Only availble via www.theshootingedge.com and there dealer network.
just wanted to show you some pics of the finished item
specs
cnc milled from 7075 alum
Type III mil spec matt anodized
cnc milled 416 stainless steel nut
Only availble via www.theshootingedge.com and there dealer network.
Last edited:
- Location
- Vancouver, BC
thats an incredible little piece... congrats on this one. great idea
- Location
- East ontario
Thanks for that.
We made it mainly for the semi auto Fabarm, but will work with any of the combat shotguns.
The fabarm line is one hell of a product, but shooting a 3 " out of the semi or the pump and be a bit much with how light the gun is.
So this item will fix it.
For those CGN mambers out west james has one set up on the range you should go in and try it out.
bbb
- Location
- East ontario
just an up date for anyone thats intrested i nthis consept.
The shooting edge and target sports have these in stock, we know getting the Knoxx stock from the company has been slow with blackhawk taking them over but its well worth the waite, drop into TSE and check out the test gun that have set up, i think you will be impressed.
bbb
The shooting edge and target sports have these in stock, we know getting the Knoxx stock from the company has been slow with blackhawk taking them over but its well worth the waite, drop into TSE and check out the test gun that have set up, i think you will be impressed.
bbb
