ZMT MWS 15 and 25

[greentips]

The Poles really got things nailed down, unlike some others. Most likely because they do have a real shooting culture there. Radom MSBS is having quality issue, so their parent company PGZ is using another one of its company ZMT to create another system to work as insurance. Beryl is on the way out eventually.

All the right stuff. AR Lower ergonomics. Monolithic Extrusion tube upper with bolted on internal steel rail. Barrel trunnion is bolted on with apparently 6 or 4 torx screws on each side. Not excessively hight bore to rail height - relatively compact for this kind of gun.

300blk, and 5.56, 7.62NATO in the 25 version.

This is what properly designed system should look like.

 

[greentips]

 

[Rebel Rouser]

Sweet!

 

[rambones]

want

 

[bfiles]

Would love one

 

[beltfed]

I wonder how similar these are to the B&T223/308 on the inside.

 

[greentips]

I wonder how similar these are to the B&T223/308 on the inside.

I suspect they are all quite similar, as a matter of fact, SCAR, CZ Bren, APC, HK 433....they all pretty much the same basic design idea.

The idea is actually G36, how to repackage HK G36 inside an aluminium extrusion tube instead of plastic. And the g36 idea is to make an AR18 with a square block BGC and side cam pin track, that is guided by receiver rails and a single recoil rod at the back instead of the twin guide + recoil rods.

Even X95 is more or less the same idea.