Vortex Venom

These are made to sit between the Diamondback Tactical and Strike Eagle ranges. I believe they are trying to hit a specific price point for a certain class of competition with this one, which I like because it's specifically intended for competition use with a reasonable price point. Decent reviews on YouTube from shooters much better than I. It should have very good optical quality, plenty of adjustment for reaching way out there, and a really good warranty.
 
remington jim said:
VORTEX VENOM Scope

5-25X56 FFP
SKU VEN-52501
EBR-7C (MOA) Reticle | 34 mm Tube

Any one using one of these scopes ? at $699.00 retail CAN $$ seems like a GREAT buy ! Heavy thou ! BUT should make a GREAT steel banger scope - OPINIONS ?? ;) RJ
Click to expand...

I have this exact scope mounted on my Cadex SHP 308 win, and have shot more than 200 rounds since. Great scope, very clear glass, worth the money.
 
remington jim said:
Right on Sounds Good ! - Do the turrets click nice - smooth and even and return to zero properly ? RJ
Click to expand...

turrets clicks vey positive, you can feel every click affirmatively.
I have no issues of returning to zero. It has a zero-stop feature when set the turret can only go downward 1 3/4 moa.
 
Found some 34 mm UTG PRO Rings on amazon - Cheap ! - $95.00 mailed to me ! anyone tried them - MADE in the USA ! NOT off shore they say ! RJ

Proudly Designed and Made in USA
• High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective
• The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
• UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
 
Last edited:
remington jim said:
Found some 34 mm UTG PRO Rings on amazon - Cheap ! - $95.00 mailed to me ! anyone tried them - MADE in the USA ! NOT off shore they say ! RJ

Proudly Designed and Made in USA
• High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective
• The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
• UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
Click to expand...

You won't tell the difference. I have a pair of MDT for more than the double the price and honestly I don't think it's worth the price.
 
You must log in or register to reply here.
Back
Top Bottom