SO who ordered a Dominion Arms 870 Grizzly

These pics are really sweet. What a great looking shotgun with all the different accessories attached . You can really change up the look . It really has a nice fit and finished look to it. Man , i can't wait to get mine . I am really pumped :D Hey, if this is modeled after an 870, can all aftermarket parts that go on an 870 go on this gun ?
 
Last edited:
Can-down said:
If you want a pistol grip that is still over 26 1/4" you will have to get a Knoxx breacher's grip and then weld/epoxy a sling loop onto the sling loop stud....without an extension on the sling stud the measurement is 25 7/8" so it needs about 3/8" extension to get to 26 1/4"

The Spec Ops Folder is the same needs a minor extension to make it non-restricted.

I removed mine once I had taken the measurement....

Grizfold4.jpg


Grizfold3.jpg
Click to expand...

Get a single point sling attachement from S&J (badboybeason) on the board that should add enough length to put you right at 26 1/4 - quality part and no cheesy welding....
 
load1up said:
These pics are really sweet. What a great looking shotgun with all the different accessories attached . You can really change up the look . It really has a nice fit and finished look to it. Man , i can't wait to get mine . I am really pumped :D Hey, if this is modeled after an 870, can all aftermarket parts that go on an 870 go on this gun ?
Click to expand...

So far we haven't find a single 870 aftermarket part that doesn't fit yet...
 
Get a single point sling attachement from S&J (badboybeason) on the board that should add enough length to put you right at 26 1/4 - quality part and no cheesy welding....
Click to expand...

That crossed my mind and it would be pretty close for sure....
 
Griffoneur said:
Well, now I need to find a way to mount a 22" shottie on the wall. It is too damn short to fit on a conventional gun rack.
Any ideas on what to use from Home Depot?
Click to expand...

This is a mockup for my 8.5" and shows how I will be mounting some of my guns in the new gun room. The trigger lock is by MAGLOC, opened by four button code and it screws to the wall studs with two screws (I use 3 1/2" or longer). The forend holder is a dowel or rod or covered screw. I got mine from MAGLOC in Burnaby BC, they have a website as well.

triggerlock007.jpg

triggerlock002.jpg

Cheers
 
My 870 Grizzly

With many thanks to Can AM for their hard work to get us more cool toys at cool prices.

Well my 870 Grizzly works like a charm I mixed 3 inch and 2 3/4 together no jams nothing. Hold on tight, It gives a 12-14 inch spread at 20-25 feet. With 000, 00 buck shot and # 4 bird shot. Its a joy to shoot.



http://www.youtube.com/watch?v=KkV3_FXEI0c


<object width="425" height="373"><param name="movie" value="http://www.youtube.com/v/KkV3_FXEI0c&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/KkV3_FXEI0c&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" wmode="transparent" width="425" height="373"></embed></object>
 
Last edited:
Clobbersauras said:
Get a single point sling attachement from S&J (badboybeason) on the board that should add enough length to put you right at 26 1/4 - quality part and no cheesy welding....
Click to expand...

May work for the Breachers grip, but the sling loop will interfere with the folders operation.
I'll check when I receive my 12.5....I have all 3 Knoxx options...just waitn' for the gun..:D
 
AHHH!!! I can't take it anymore!!! I need my GRIZZLY!!! Thanks for the teaser tango!!! Much appreciated!!!

Cheers
Jay
 
tangospike99 said:
With many thanks to Can AM for their hard work to get us more cool toys at cool prices.

Well my 870 Grizzly works like a charm I mixed 3 inch and 2 3/4 together no jams nothing. Hold on tight, It gives a 12-14 inch spread at 20-25 feet. With 000, 00 buck shot and # 4 bird shot. Its a joy to shoot.



http://www.youtube.com/watch?v=KkV3_FXEI0c


<object width="425" height="373"><param name="movie" value="http://www.youtube.com/v/KkV3_FXEI0c&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/KkV3_FXEI0c&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" wmode="transparent" width="425" height="373"></embed></object>
Click to expand...


Got mine last week . mint shape no issues . Havent shot it yet but I wont be shooting 3"
These guns are not magnums & barrel is chambered for 2 3/4" NOT 3"

My mistake they are 3 "
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom