Stock duplicator options in Western Canada

iron cat

iron cat

CGN Ultra frequent flyer
Rating - 100%
28   0   0
Location
Outpost of the Empire
Howdy! Couldn't find anything using the search function.
Anybody know of someone with a stock duplicator in Western Canada, or anywhere in Canada?
I want to build another match rifle with a stock exactly like
The one I have now .
Cat
 
google.ca

Click the tools tab on google page: search options: Canada only
restricts results to sites (mostly) registered in Canada.

My cursory search showed a few in Alberta that offer it.


https://www.go ogle.ca/search?q=gun+stock+duplicator+service&cr=countryCA&biw=1861&bih=1150&tbs=ctr%3AcountryCA&ei=3e7jYp-6Co6eptQP3ZawiAs&ved=0ahUKEwjfnJncp575AhUOj4kEHV0LDLEQ4dUDCA0&uact=5&oq=gun+stock+duplicator+service&gs_lcp=Cgdnd3Mtd2l6EAMyBggAEB4QFjoJCAAQHhCwAxAHOgsIABAeELADEAcQCjoICAAQgAQQsAM6BAgAEEM6BQgAEIAESgQIQRgBSgQIRhgAUL0DWOYLYM0MaAFwAHgAgAFNiAG8BJIBATiYAQCgAQHIAQrAAQE&sclient=gws-wiz
 
Try Gary Flach, he may have a new one. Also I believe Ralf Martini in Creston has one and I think Weber & Markin in Kelowna might have Don Robinson’s last duplicator. J.
 
iron cat said:
Howdy! Couldn't find anything using the search function.
Anybody know of someone with a stock duplicator in Western Canada, or anywhere in Canada?
I want to build another match rifle with a stock exactly like
The one I have now .
Cat
Click to expand...

One of the Trace's (same family as the scope Repair folks) used to do stock duplicating. Might be worth a phone call or email. - dan
 
Depends on if you supply the blank and how complete you want it.

A 1 peice stock you supply the blank it eould be 500-600$ to have roughed out. Then you need to finish your self.

Mine all in all will probably be 1500-1700 finished.

Thats starting with a blank, roughed out, action inletted, stock sanded/shaped and smoothed, checkering cut and things fitted like sling mounts, butt plate, grip cap, tang safety, forstock cap and finishing

The blank also costed me 1200 but you can get cheap blanks if you just want a strong dry blank and not worried about wood figure and grain
 
Evanguy said:
Depends on if you supply the blank and how complete you want it.

A 1 peice stock you supply the blank it eould be 500-600$ to have roughed out. Then you need to finish your self.

Mine all in all will probably be 1500-1700 finished.

Thats starting with a blank, roughed out, action inletted, stock sanded/shaped and smoothed, checkering cut and things fitted like sling mounts, butt plate, grip cap, tang safety, forstock cap and finishing

The blank also costed me 1200 but you can get cheap blanks if you just want a strong dry blank and not worried about wood figure and grain
Click to expand...

MCRS is going to do an identical Palma match stock for me, complete with Anschutz rail and their adjustabe cheek piece using one of their walnut blanks for under $900.
That is a pretty good price .
Cat
 
You must log in or register to reply here.
Back
Top Bottom