The "What Have You Reloaded Today" thread

[G_Alan]

Loaded 75 Rounds of #7.5 1200 FPS 1oz sporting clay loads. Deprimed and wet tumbling a load of brass. I've been slacking on the reloading dept. I need to spend more time on the bench.

 

[13bibby]

20 rounds hornaday brass 270 win h4831sc 150g nosler ablr.
12@53.7g 2.735cbto to 2.775 seat depth
8@ 55.3 - 57.1g ladder
Hoping to increase speed from the 53.7 load (2667fps sd7)thoughts?

 

[yomomma]

Starting my 308 test ladder

 

[mad max78]

60 160 gr woodleighs for my 6.5x55

 

[6MT]

......

 

[DGY]

I turned 51 30-06 brasses into 51 8x57 brasses! Hope they work well!

 

[dan belisle]

I turned 51 30-06 brasses into 51 8x57 brasses! Hope they work well!

They should. Ive done that for various cartridges back when I couldnt find brass. - dan

 

[AfroCowboy]

I squashed 3 FTX .357 projectiles into short-stubby-spitzers before going online reading they can only be loaded on a hornady die, or a die designed for Spitzer shaped bullets.

I loaded 325 gr FTXs for 45-70 no problem thus my naivety.

I have since ordered a Hornady 358 200gr fix seating stem that may work.

 

[VanMan]

a productive weekend.

a big batch of 357 on the 650


small batch of 30-30 on the 550


a big batch of 9mm on the 1050


and a small batch of hot 357 rounds on the 650 (110gr jacketed soft point, 22gr H110)

 

[dan belisle]

Setting up the annealer, then to run some 270 wsm through it before I reshape them into 7 SAUM. - dan

 

[spooksar]

Finally got my 375 Whelan Ackely Improved, built on a barn find Winchester M17 Enfield action, Bench Mark barrel, Boyd’s stock, Timminey trigger and custom bottom metal. Built by Rocky Mountain Rifles/ Corlanes out of Dawson Creek. Loaded 75 rounds today to start fire forming them hopefully Sunday.

 

[DGY]

Just reloaded 20 of 9.3x62 286gr Swift Aframe 67.5gn of H4350, fed 215 mag primers, going +- 2450fps out of my 20” barrel Husqvarna 648( or something like that) full stock rifle!! Ready for bisons next weekend!!

 

[thump_rrr]

20 rounds of 45-70 for my BFR that I just received, 20 rounds of 460 S&W and 20 rounds of 454 Casull for the 460XVR that I just received.
Those were the last 2 transfers I had inbound.:-(

 

[Hunter1970]

prepped 250 cases of 303B last night. new mold and sizers showed up today

 

[65cutlass]

Yesterday 180 gr.cast gas check in 30-06. Today cast plain base paper patch in fireformed and trimmed 416 Rigby cases for the 500 Jeffery.

 

[Snider shooter]

35 rounds of 8x56 R with cast 205 gr cast sized to 0.329. And 200 303 British with 200 gr cast. And 100 7.62x54R with the 200 gr cast.

 

[tigrr]

a productive weekend.

a big batch of 357 on the 650
View attachment 629826

small batch of 30-30 on the 550
View attachment 629823

a big batch of 9mm on the 1050
View attachment 629827

and a small batch of hot 357 rounds on the 650 (110gr jacketed soft point, 22gr H110)
View attachment 629828

Wish there was a like button! Envious.

 

[spooksar]

Loaded 25 rounds for my 300 H&H, with 180 Accubonds, plan on taking the rifle to Africa in April.

 

[savage112]

50 rounds of .22-250. This is once fired Imperial brass I have had sitting in my stash since the mid 80's and I figured it was time to use it. I was trying to hang onto it, but not sure exactly why. Just because it was Imperial I guess. The load is 35.1 grains of Varget under a 55 gr. Hornady BTSP and a Winchester LRP.

 

[hatman1793]

I *technically* didn’t reload….after a couple of jams with my S&W 4516 I found out that I needed to re-seat my 45 reloads a bit deeper.
About 500 went a little deeper. I was only using target loads so the extra pressure wasn’t really an issue, but my digital calliper really helped me alot…..