Any Interest in a Complete Barrel Drop-On Kit for the TUF-22 / Ruger Takedown ?

old303 said:
The Magpul Optics Mount is just a tiny bit of rail that looks very much like it's meant for a red dot. I'm wondering if anyone has successfully put a cantilever scope mount on one. Or is that really a job for the Dlask rail? Might be yet another reason to have one of each.
Click to expand...

It's for red dots, not scopes.
 
Yeah the optics was my concern for this, have a dlask 12.5 barrel already for my TD but when swapping would like the option be there to add optics as well, go from the 12.5 with a red dot, to say a longer 16-18 with a magnified optic. Have it all offered as a packaged rather then having to buy separately, would be convenient.
 
Ironman6067 said:
Yeah the optics was my concern for this, have a dlask 12.5 barrel already for my TD but when swapping would like the option be there to add optics as well, go from the 12.5 with a red dot, to say a longer 16-18 with a magnified optic. Have it all offered as a packaged rather then having to buy separately, would be convenient.
Click to expand...

This was my plan when I started the thread here. To be able to have a 9" or 12.5" and then be able to quick swap it out for a 16.5" or 18.5" in 2 seconds flat.
 
And just like that I've ordered a bunch of these forends in all different colours. Once they arrive we will post them here as well as on our website. These will be an option when buying a complete TUF-22TD so you can have one rifle with two different barrel set ups ( : !!
 
Doh, I stripped the takedown bits and installed them on the CF barrel I bought from you last fall but I too would love to buy those bits again so I could go back and forth between the 12.5" barrel and the factory 16" heavy barrel that was on the 10/22 from the factory.

I need to look into a source for those in Canada some day.
 
buckshot said:
Doh, I stripped the takedown bits and installed them on the CF barrel I bought from you last fall but I too would love to buy those bits again so I could go back and forth between the 12.5" barrel and the factory 16" heavy barrel that was on the 10/22 from the factory.

I need to look into a source for those in Canada some day.
Click to expand...

We will be selling kits of both the receiver front end bits as well as the block and barrels attachment bits. Give me a few days to get these up and on the website.
 
You must log in or register to reply here.
Back
Top Bottom