So if I read correctly it's not legal to make BP without an explosive license. How does one get a license.In the meantime I need a source for BP in Ont to fire my flintlock. Dave.
So if I read correctly it's not legal to make BP without an explosive license. How does one get a license.In the meantime I need a source for BP in Ont to fire my flintlock. Dave.
Does Higginsons even have any black powder these days?
If you can find a can of real fffg powder, you can use it to prime, and to put 10 gr down the barrel and then you make up the rest of the charge with 777 or Pyrodex. One pound of fffg should be enough to prime and shoot about 450 shots (if you're only using 10 gr to start a larger charge)
Few months ago they had pyrodex and that stuff won’t work in a flinter very well.
What are you running into with Pyrodex? It is all I use and I don't seem to have any problems. Just looking for info for things I should be watching out for. I lost my mentor last year so I'm "flying on my own" these days.
Pyrodex has a higher ignition temp than real black powder it won’t work in a flintlock. Only way to make it work is to duplex it with real BP. a small charge of real black powder 10gr or so(enough to be past the flash hole) and then the main charge of pyrodex(reduced by charge of real BP) And real BP in the pan.
Thanks! I guess I must be sort of doing similar to what you are describing. I have been using Pyrodex RS and priming with Goex FFFFG. It seems to work with no measurable delay in ignition. Guess I've been lucky but still, I am thinking of switching over to Triple 7. Apparently real Black Powder is very difficult to find, I am told. Thanks again.
I saw cans of blackpowder at the HACS show this weekend at 30.00 a pound can and it wasn't selling. Was Stuetzen? brand powder?
Seemed like a good price to me but I'm not really a BP shooter so couldn't say for sure



























