Mauser K98k Disassembly, Operation, Troubleshooting and Care

[joe6167]

I recently rescued my beloved Mauser from a certain despotic dictatorship, and after 5 years of hiding in cellars, attics, and crawlspaces, I need to take it apart and give it a good cleaning. I figured while I was at it, I might as well make some nice videos on the Mauser K98k, and share what I’ve learned about working on the rifle over the years, so here’s the first video in the series, showing how to disassemble the rifle.

 

[DiMP]

Good detailed video, I appreciate the addition of "Chapter Markers" in the video

EDIT: In your experience, is there any way to "refresh" a weak magazine spring? (Shim? Bend? Temper?) or is it best to just try to find a replacement?

 

[joe6167]

Good detailed video, I appreciate the addition of "Chapter Markers" in the video

EDIT: In your experience, is there any way to "refresh" a weak magazine spring? (Shim? Bend? Temper?) or is it best to just try to find a replacement?

Oh man... "Spring Theory" is a bit above my pay grade... that's like one of history's oldest questions...

I suppose "replace" would be the default setting, but what to do if you can't find any? I've heard people mention bending weak springs (in general), but I have nothing concrete to offer.

...I remember the "good old days" when you could call up the guys at Trade Ex and get whatever parts you needed... who even sells Mauser parts anymore? I've totally lost track.

 

[DiMP]

I've found new reproduction springs at places like Numrich in the states, but nothing Canadian as of yet (and the EE only allows me one WTB ad at a time which I'm currently using looking for other things)

 

[joe6167]

I've found new reproduction springs at places like Numrich in the states, but nothing Canadian as of yet (and the EE only allows me one WTB ad at a time which I'm currently using looking for other things)

I've bought some stuff from Numrich in the past (2015-2016). No idea what their shipping policies are like now...

 

[DiMP]

I've bought some stuff from Numrich in the past (2015-2016). No idea what their shipping policies are like now...

There is no issues with ordering Most parts from Numrich, and the restricted export products are clearly marked. The main issue is it doesn't seem worth it to pay ~$40usd to ship a $14 magazine spring

 

[contact148]

There is no issues with ordering Most parts from Numrich, and the restricted export products are clearly marked. The main issue is it doesn't seem worth it to pay ~$40usd to ship a $14 magazine spring

the only way its worthwhile is to order several things you need at one time...at least that's the way it used to be

 

[Potashminer]

Is possible to snip width or grind to fit - so was at least one P14/P17 that ended up here with a K98 Mauser follower and magazine spring - appeared to work fine. Another guy tells me that he was able to do minor grind and a mag spring from P14 is now being used in a P17 (or perhaps in a version of Mauser 98?) - so might have to look at alternate sources to work - instead of getting "that" part number replacement.

 

[joe6167]

In the next video in my series on the K98k Mauser, I examine all of the intricacies of how the Mauser 98 Action works. In addition to covering the operating principles of the bolt, the receiver and the stock, I also discuss some of the systems iconic features such the controlled feed system, the third safety lug on the bolt, and the gas vent system. I also compare the Mauser action with contemporary bolt actions throughout the presentation.

 

[joe6167]

In the next video in my series on the K98k Mauser, I discuss some of the work that was done to reactivate it after it was pulled out of long-term military storage, including degreasing the stock, refinishing the stock with Boiled Linseed Oil and checking headspace, some of the problems I’ve had with the rifle including a damaged floorplate and bayonet blade, as well as shift in Point of Impact, and my experiences and observations with some brands of common commercial ammunition.

0:00 Introduction
1:16 Degreasing The Stock
1:52 Oiling The Stock
3:44 Headspacing
5:24 Floorplate Problem
6:46 Point Of Impact Shift
8:00 Bayonet Disassembly And Blade Repair
9:20 Commercial Ammunition Loadings
11:36 Sources
11:46 Conclusion