Let's see some pic's of your SxS's & O/U's
- Thread starter Win/64
- Start date
The teardrop, or drop point, has been around as long as bar locks have been in use, so since the days of the flintlock. They were not as common as they are seen today and may have evolved along with the shape of the lock plate. It was not uncommon for flintlock plates to have a rearward 'tail', that could be pointed or square-tipped. Usually, a small border of wood around the lock plate was left flattened to match the lock plate surface, and for a plate with a 'tail,' the resulting projection of the flat border could be left as-is or further shaped into the teardrop. The teardrop behind the lock plate was carried over to percussion guns with bar locks, through the pin-fire era, and on to central-fire guns with bar locks. The practice further carried over to boxlocks, where the flat sidepanels of the stock has to transition to the curve of the hand. That part could be left pointed, curved, or given teardrops for an extra flourish.
So, it was always ornamental, where a stock maker could add a bit of flair to an otherwise standard shape.
No post in this thread should be without a picture, so here is a teardrop on a W.W. Greener pin-fire.
The teardrop, or drop point, has been around as long as bar locks have been in use, so since the days of the flintlock. They were not as common as they are seen today and may have evolved along with the shape of the lock plate. It was not uncommon for flintlock plates to have a rearward 'tail', that could be pointed or square-tipped. Usually, a small border of wood around the lock plate was left flattened to match the lock plate surface, and for a plate with a 'tail,' the resulting projection of the flat border could be left as-is or further shaped into the teardrop. The teardrop behind the lock plate was carried over to percussion guns with bar locks, through the pin-fire era, and on to central-fire guns with bar locks. The practice further carried over to boxlocks, where the flat sidepanels of the stock has to transition to the curve of the hand. That part could be left pointed, curved, or given teardrops for an extra flourish.
So, it was always ornamental, where a stock maker could add a bit of flair to an otherwise standard shape.
No post in this thread should be without a picture, so here is a teardrop on a W.W. Greener pin-fire.
That is a beautiful piece. Thanks for the explanation. I had always assumed it was just for looks.
Just back from a trip to Stillwater Restorations. Many thanks to Chris Dawe on his exceptional work. His photography skills are better than mine as well, pics by the tree are ones he sent me. 
A before and after:
View attachment 677817
A before and after:
View attachment 677817
Attachments
Falconflyer
CGN Ultra frequent flyer
Very nice, awesome work!
Here is the original post link :
https://www.canadiangunnutz.com/for...-amp-O-U-s?p=19232563&viewfull=1#post19232563
The gun is a 1964 Pachmayr Custom Superposed which I believe compares closely to a Browning Midas.
https://www.canadiangunnutz.com/for...-amp-O-U-s?p=19232563&viewfull=1#post19232563
The gun is a 1964 Pachmayr Custom Superposed which I believe compares closely to a Browning Midas.
Thanks, 3200. Now I remember your gun. It's gorgeous!!! Pachmayer customized a number of guns---think it was in the 60's and 70's---recall that he favoured Superposed's and Parker's. I believe there is a book written about his custom work.
Apologies to hijack the thread but I am sure I will be forgiven given the Cultural Significance…
Its extremely festive out here in London (I happen to be here coincidentally for work this week) today on the eve of the coronation. BTW I also visited Purdey and FBeesley locations…
Its extremely festive out here in London (I happen to be here coincidentally for work this week) today on the eve of the coronation. BTW I also visited Purdey and FBeesley locations…
Attachments
Last edited:
Thankyou & my sentiments exactly; and as my signature says “for King & Country”…
the spank
CGN Ultra frequent flyer
- Location
- Planet Earth Wearing My Tinfoil Hat
Well I finally joined the SxS fraternity. Made my first SxS purchase. 
I won't say what I purchased at this time but it fit my requirements as an American Classic and really drew me to it though I am certain it is not everyone's cup of tea.
I spent about 15 minutes texting back and forth with Chris Dawe on his opinion of the gun and purchase price before pulling the trigger. Fortunately Chris knew the gun and as I suspected was the fellow who restocked the gun and checkered it in an original checkering pattern. I can't wait to get it in hand and burn some of my Bismuth through it this fall on late season Greenheads. I'll post pics when it arrives! To say I am pumped is kind of an understatement!
I won't say what I purchased at this time but it fit my requirements as an American Classic and really drew me to it though I am certain it is not everyone's cup of tea.
I spent about 15 minutes texting back and forth with Chris Dawe on his opinion of the gun and purchase price before pulling the trigger. Fortunately Chris knew the gun and as I suspected was the fellow who restocked the gun and checkered it in an original checkering pattern. I can't wait to get it in hand and burn some of my Bismuth through it this fall on late season Greenheads. I'll post pics when it arrives! To say I am pumped is kind of an understatement!
Well I finally joined the SxS fraternity. Made my first SxS purchase.
I won't say what I purchased at this time but it fit my requirements as an American Classic and really drew me to it though I am certain it is not everyone's cup of tea.
I spent about 15 minutes texting back and forth with Chris Dawe on his opinion of the gun and purchase price before pulling the trigger. Fortunately Chris knew the gun and as I suspected was the fellow who restocked the gun and checkered it in an original checkering pattern. I can't wait to get it in hand and burn some of my Bismuth through it this fall on late season Greenheads. I'll post pics when it arrives! To say I am pumped is kind of an understatement!
Welcome aboard the SxS fraternity.
By all means, keep us posted.
Well I finally joined the SxS fraternity. Made my first SxS purchase.
I won't say what I purchased at this time but it fit my requirements as an American Classic and really drew me to it though I am certain it is not everyone's cup of tea.
I spent about 15 minutes texting back and forth with Chris Dawe on his opinion of the gun and purchase price before pulling the trigger. Fortunately Chris knew the gun and as I suspected was the fellow who restocked the gun and checkered it in an original checkering pattern. I can't wait to get it in hand and burn some of my Bismuth through it this fall on late season Greenheads. I'll post pics when it arrives! To say I am pumped is kind of an understatement!
You do know this thread is titled "Let's see some pics......"
the spank
CGN Ultra frequent flyer
- Location
- Planet Earth Wearing My Tinfoil Hat
You do know this thread is titled "Let's see some pics......"
Oh you will! The website pics are the _hits or I'd be posting!!
That is a resounding yes! Have no idea how I'll manage? Heck I can barely work a pump any more without messing up never mind figure out a second trigger!
I suppose I'll have to buy a doubles mount for my Shotkam to video my proficiency with this new marvel of technology I have purchased which according to records I found online dates this gun manufactured in 1927.
Last edited:
the spank
CGN Ultra frequent flyer
- Location
- Planet Earth Wearing My Tinfoil Hat
Well the gun has been shipped. I'll be home on July 9th from work for my next days off. Delivery standard shows July 12th so I should have it in hand once home to unbox. For now here is a sneak peak...these were from the dealers website. I'm sure some of you will recognize the pics from their ad.
