Single shot Husqvarna 30-30?

Looks the same to me. Receiver OD is the same at the barrel too.

0snVBq1.jpg


Not the best pic...sorry.

:cheers:

No worries, bud. Thanks very much for the intel. Still trying to be super-sure that rechambering mine to 38-55 was a reasonable thing to do. Reckon if it can handle 30-30, it can handle 38-55.
 
30-30 Maximum pressure (CIP) 46,000 psi (320 MPa) bullet .308 in (7.8 mm)
38-55 Maximum pressure (CIP) 35,000 psi (240 MPa) bullet .377 in (9.6 mm)

Although there's less psi, you're also missing .9mm (1/32") of barrel per side.
If my math is right...someone check it plz.
 
The 45-70 version had a beefier receiver, probably fun with mouse fart cast lead, not sure my shoulder would like full house loads...
 
The 45-70 version had a beefier receiver, probably fun with mouse fart cast lead, not sure my shoulder would like full house loads...

Interesting.

Left = 30-30 Receiver/barrel is slightly smaller than the 32-20

V9XbUdM.jpg


Right = 32=20

gy1BINS.jpg


Barrel is 12-13mm longer on the 30-30.

lxBI3uH.jpg
 
I wonder if any of the batches coming in through Intersurplus will have any.

I hope so, waiting for interesting pieces there, they got some nice rifles but all pretty common makes and chamberings. If someone was looking for decent used that's the spot, I just already got nice examples of basically everything they have already from Tradex.
Did pick up a nice BRNO ZKK 222 from them a while back I'm pretty tickled with...
 
Back
Top Bottom