**UPDATE** for CZ Bren 2 MS Barrel Components only at Dlask Arms Corp.
- Thread starter Dlask Arms
- Start date
What is the gas tube detent spring, detent and pin? I don’t see it on the parts exploded diagram.
Thank you! Just copped those parts. Just need a piston and it should be a full drop in.
Ordered from az tech armory. Hopefully will order whatever parts dlask will make or bring as well
Leigh, am I completely insane to want an option where I can have the original gas block and trunnion swapped back to my R barrel while the new aftermarket gas block and trunnion will go onto my NR barrel?
It will probably cost a bit more... but everything that are factory original will be together...
Merry Christmas and Happy New Year everyone!!!
It will probably cost a bit more... but everything that are factory original will be together...
Merry Christmas and Happy New Year everyone!!!
Leigh, am I completely insane to want an option where I can have the original gas block and trunnion swapped back to my R barrel while the new aftermarket gas block and trunnion will go onto my NR barrel?
It will probably cost a bit more... but everything that are factory original will be together...
Merry Christmas and Happy New Year everyone!!!
This. Would love to know this as well
Take your gas piston out of your gun like you would for cleaning. You need all of that. So, the first part that you turn and holds it all in is your regulator, next is the piston which goes in the regulator, then the piston rod, and spring. The other part you need is the little lever that you pushed down to take your regulator out, which has a small spring and a roll pin.
It will be simple to swap all of this between different barrels, with the exception of the little lever you pushed to unlock the regulator. That will require a punch, and has small fiddly bits, but is still easily doable. Keep in mind that you need tools to change the barrel anyway, so even moving stuff from one barrel to another won't slow the process down much.
If it was me, I'd just try to source the parts that are pinned in. Everything else is just spare parts. Assuming you are going between barrels of the same caliber that is.
It will be simple to swap all of this between different barrels, with the exception of the little lever you pushed to unlock the regulator. That will require a punch, and has small fiddly bits, but is still easily doable. Keep in mind that you need tools to change the barrel anyway, so even moving stuff from one barrel to another won't slow the process down much.
If it was me, I'd just try to source the parts that are pinned in. Everything else is just spare parts. Assuming you are going between barrels of the same caliber that is.
Last edited:
Gentlemen, chill. We are on it and will have most, if not all of the parts to have a drop on system. No need to scramble.
So far we have coming, or making, springs, regulator, regulator latch and cross pin, and very possibly bolt heads for 7.62.
Things this time of year run a bit slower but we will get there.
Be good, be safe and spend the next week thinking about those you love. 2024 will be better, I promise.
Merry Christmas to all.
So far we have coming, or making, springs, regulator, regulator latch and cross pin, and very possibly bolt heads for 7.62.
Things this time of year run a bit slower but we will get there.
Be good, be safe and spend the next week thinking about those you love. 2024 will be better, I promise.
Merry Christmas to all.
Leigh, am I completely insane to want an option where I can have the original gas block and trunnion swapped back to my R barrel while the new aftermarket gas block and trunnion will go onto my NR barrel?
It will probably cost a bit more... but everything that are factory original will be together...
Merry Christmas and Happy New Year everyone!!!
Im a bit of a noob here, but wouldn't you still need a third party gas regulator since the original was modified for the longer barrel?
The expenses would keep on piling up, fellas...Sheesh.
You sure about that ? I don't remember you being here when we changed out the barrels...
