Looking for a bit of under-tube rail

[ilikeoldguns]

Good day, I'm ready to pull my hair out here.

All I want is a bit of rail to clamp under my Choate magazine tube extension. You'd think I could find that easily.

NOPE. Sure cannot. I have found a few offerings from Aliexpress, but I can't seem to find anything from any Canadian vendor, which feels insane. I can find barrel/tube clamps that give me side-mounted rails, but nothing that gives me underneath the tube. I have checked all the advertisers here, but no luck. My local shops have very little stock right now.

I feel like I am missing something here in my search terms; "rail", "tube", "Clamp", "mount" and most sites are giving me scope rings and AR-accessories.

Something like this would be great: https://combatsportsupply.com/utgshotgunsinglerailbarrelmnt.aspx

Why is this so difficult? A few years ago; I could just pop on ebay.ca or amazon.ca and find whatever I liked, now it seems like search algorithms have got brain damage.

Thanks for your time.

 

[Greenhorse six]

Google Streamlight Mag Tube Rail TL Canada .
www.amazon.ca/Streamlight-69901-STL-Tube-Rail-SuperTac/dp/B0028LXG5A

 

[ilikeoldguns]

I need something longer, as in the example above. If I could get that exact unit in Canada, I'd be laughing.

 

[lerch641]

When all else fails, hose clamps and a long pic rail.

 

[ilikeoldguns]

When all else fails, hose clamps and a long pic rail.

Don't tempt me...I'm trying to not make this look too bubba. But the practicality does call to me.

 

[JeffMan]

How about this?

https://www.replicaairguns.ca/shotgun-rails-and-bayonet-mount-for-remington-870

 

[blakeyboy]

Set two clamp on and back to back them. Found a solid 5 slot on Amazon easy and it would double up to 10 slot like a champ. Use the big brain.

https://www.amazon.ca/NcDe-Tatcical-Flashlight-Standard-13-15Gauge/dp/B07L9VFDSR/ref=mp_s_a_1_3?crid=2VOE3WOKETOVC&keywords=shotgun+barrel+clamp&qid=1704768959&sprefix=shotgun+barrel+%2Caps%2C330&sr=8-3

 

[ilikeoldguns]

How about this?

https://www.replicaairguns.ca/shotgun-rails-and-bayonet-mount-for-remington-870

I actually bought one of those and they don't even machine their bayonet lugs correctly. Also; gives me size rails and not under-rails.

Bought their tri-rail unit too and that didn't even fit. Although it may have been mis-packed, because it was so far off fitting on my 870, it may have been meant for another type of gun.

 

[ilikeoldguns]

Set two clamp on and back to back them. Found a solid 5 slot on Amazon easy and it would double up to 10 slot like a champ. Use the big brain.

https://www.amazon.ca/NcDe-Tatcical-Flashlight-Standard-13-15Gauge/dp/B07L9VFDSR/ref=mp_s_a_1_3?crid=2VOE3WOKETOVC&keywords=shotgun+barrel+clamp&qid=1704768959&sprefix=shotgun+barrel+%2Caps%2C330&sr=8-3

Just tried that unit. Holy crap is that a POS. The "Standard" rail wouldn't fit anything.

 

[ilikeoldguns]

So here is what I had to do...

TWO of those chance Chinese ring-clamps. A CDM-gear ROK-12 barrel clamp for strength and finally a "Monstrum" Picatinny rail riser for scopes and optics.

 

[MCon]

h ttps://www.amazon.ca/dp/B01049A18M
I have this on my 870 for side mount, I think you could just turn it to whatever orientation you want ?

 

[pirate604]

Would something like this work?
I have one on my Norinco 870 and it is pretty solid, not sure what brand the one I have is tho.

ht tps://www.camouflage.ca/ncstar-1-inch-shotgun-magazine-tube-mount