P226 Parts

northballistics

northballistics

Member
Rating - 0%
0   0   0
Location
Beautiful BC
I can't find a firing pin anywhere, nor an 9mm conversion kits. Do anyone have a secret place I can find these parts to bring my P226 back to life?

gun.jpg
 
Last edited:
What age is your gun? Does it have a folded slide or a machined one?
Sig has discontinued F.P.'s for the old ones, they are about 1/4" shorter than the newer ones. Aftermarket new ones are available for old guns.
 
Norinco NP34 parts are largely compatible with early style P226 pistols.

Calibre exchange kits come up from time to time on the EE here, I helped a friend score a 9mm top half for his, a few months ago.
 
OP,
Is your firing pin broken?
IF,the pistol has had repeated dry fires the firing pin stop pin may be the issue & need replacing.

Have you checked the Firing Pin Lock in the slide?
Have you checked the Firing Pin Lock Lever for wear?

SIG P Series firing pin will endure 10's of thousands of rounds fired w/o issues.
 
DANS40X said:
OP,
Is your firing pin broken?
IF,the pistol has had repeated dry fires the firing pin stop pin may be the issue & need replacing.

Have you checked the Firing Pin Lock in the slide?
Have you checked the Firing Pin Lock Lever for wear?

SIG P Series firing pin will endure 10's of thousands of rounds fired w/o issues.
Click to expand...

It was all taken apart for painting and the shop misplaced the bag of parts. :| #### happens.
 
You must log in or register to reply here.
Back
Top Bottom