MustardoTigre
Member
- Location
- Toronto, Ontario
Absolutely ridiculous.
All-New: Type 81M
- Thread starter Tactical Imports
- Start date
Absolutely ridiculous.
It's clearer than my Holosun 507k, feels solid. Haven't hit the range yet so can't really tell.
And yes, the stock wood is very orange...main reason I wanna get rid of it
Somebody reported that TI had some kind of fallout with CP. I was one of the first to order and had mine less than a week after order.
But after that it went downhill. No word from TI about that fiasco.
Pretty sure the AK mastermount won't fit on the underfolder because of where the internal pins are on the receiver unfortunately. Being able to open the stock and pull the dot and rail out of your pack and locking it on to the master mount would be so nice
Someone needs to design an underfolder to fixed stock adapter and a dust cover rail similar to the texas weapon systems dog leg and they'd probably be rolling in the dough. I'm assuming the mlok handguard releasing in april from TI will be the best option for mounting optics to the underfolder?
So the external of the barrel on my gun looks like a layer is "peeling" off. I'm guessing the barrel bluing wasn't done properly? Not sure if I should even bother TI with something so miniscule. Might just bring it to a local smith to look at and see what's up. Just something to look out for guys. Hope you get yours soon.
MosinMan13
CGN Regular
- Location
- Thornbury Ontario
I’m in the same boat and my order number is 268. Ordered on Mar 12 as well. Tried calling and emailing too. No response unfortunately. I understand that they might be overwhelmed with orders but would like to know if its an error on my end and something I can fix to expedite the process.
Hey guys, i finally received my underfolder this Tuesday (271××) . And i sure do have mixed feelings.. the only other Type 81 i own or ever bought is t81 SR, even thought i held out for 5 years from entering t81 club, the SR was just too ###y to pass up. Considering how many SVD clones i made in the past, this was a no brainer. So i am relatively new in T81 space with only the SR to compare to.
So i must say the SR is far superior in quality comparing to the newly received underfolder. The phosphate finish on this "M" is pretty thin and has blemishes in various places. the dust cover looks a bit crooked/twisted and doesnt fit the receiver as nice as SR. The underfolder is solid side to side, but it does have that 1/4" up and down slack.
Now my least favorite part.. after field stripping the rifle and carefully observing it i understood where all these misaligned barrel issues comes from. There are 4 rivets that fasten barrel extension to the receiver, two on each side. So if barrel is nicely pressed into the receiver prior to drilling and riveting it, the rifle turns out perfectly straight. For some weird reason, perhaps flawed jigs, some barrels are not properly/evenly inserted into the receiver. Resulting in all kinds of angled variations
.. So, again, i dont know how all the other models compared to this last shipment, and i doubt that majority of the "M" guns are as bad. But seeing how nice the SR is in comparison, there is much to be desired.. Now lets get to the pics.
Here is an example of the blemish on the receiver:
And here is the difference between SR blued dust cover vs. M
SR:
"M":
And here are some pics of nicely pinned SR barrel, vs M
SR:
M:
As you guys see there are some serious differences. I still really want to own an M model, and i dont see why there needs to be a compromise in quality, considering it comes from the same factory...
Here are few other observations when comparing SR to M
The part of the receiver, where barrel is inserted, looks different. SR has longer block with pins positioned farther apart. The barrel block on the M model is cut shorter with both pins closer together.. not sure why that is..
Also all 4 pins on the SR are same large size.. and the M version has two smaller pins at the rear
Here is the gas system and barrel profile difference between the two models..
Hope you guys find this info helpful, and i would like to know why there is such difference between the last two shipments, and these were only 1 year apart..
For those that are wondering how to improve this toy looking orange finish on the furniture, i will post some step by step tutorial as soon as i know whats happening with this particular rifle, i'll wait for TI to respond with suggestions..
But here is the type of finish you can achieve with same wood..
(As long as its the same wood that was used as on SRs.. i will know once i dig into the new set)
Last edited:
