While you are on the site, in your browser find and click "Add to Home Screen" A CGN beaver app icon will then be created to your phone that is directly link to the site.
Note: This feature may not be available in some browsers.
I would agree with above. Medium would be a safer bet than low. That scope has a pretty short body / overall length so the objective is going to be closer to the chamber
Low mounts should be perfect for that scope. I have several Rem700 long actions, all fitted with Talley, one piece Low mounts. Scopes include Swarovski Z3 3-10X42, Z5 3-18X44, Leupold 3-9X40, and 3-10X40.
Low mounts should be perfect for that scope. I have several Rem700 long actions, all fitted with Talley, one piece Low mounts. Scopes include Swarovski Z3 3-10X42, Z5 3-18X44, Leupold 3-9X40, and 3-10X40.
You should be fine depending on the length of the main tube. You might need to line the mounts up with the highpoints facing each other if it has a short main tube.
You should be fine depending on the length of the main tube. You might need to line the mounts up with the highpoints facing each other if it has a short main tube.
Took me a bit to get a pic but here's my 35 with Talley Lows and a 42mm bezel. The objective bezel comes very close to the barrel but as it is a custom contour with some extra girth forwards from the chamber, but still does not touch.
Took me a bit to get a pic but here's my 35 with Talley Lows and a 42mm bezel. The objective bezel comes very close to the barrel but as it is a custom contour with some extra girth forwards from the chamber, but still does not touch.
