Which 22LR mount for 10/22?

Since the Picatinny rail was specified, the weaver style that came with the rifle is not that.

Check with Dlask or MDT. Both might be more than you are willing to spend but if your rings require a Picatinny then you can afford it.
I ran into the same problem with a Sig Sauer RedDot so what I saved on one sale I paid for on the other end.
 
Considering the thunderous shuddering recoil of the awesome .22-gauge hunting round, you'll need one custom machined from the finest ordnance steel. Expect to pay four-figures for the first one, and replace it on a wear schedule of every 500-rounds.

There? Does that help?
 
$20 UTG Ruger 10/22 rail from Amazon is more than sufficient. Had mine for like 5 years, no issues. Torque to spec and make sure to loctite it down and you'll have no issues holding zero.

There's nothing wrong with the weaver rail it comes with but if you want to be able to swap rails/mounts/optics around with your very likely other Picatinny railed guns this is the better way to go.
 
Torque on the screws is very important on a Ruger 10-22.

Dig around and you'll find Ruger says 12-14 INCH pounds is what's called for.

With the aluminum reciever it is very easy to strip the threads.

I use this Monstrum brand Pic Rail.

It's a good length , fit and finish is perfect and under $25 on Amazon.

1000029333.jpg
 
Last edited:
HoneyBadgerDontCare said:
$20 UTG Ruger 10/22 rail from Amazon is more than sufficient. Had mine for like 5 years, no issues. Torque to spec and make sure to loctite it down and you'll have no issues holding zero.

There's nothing wrong with the weaver rail it comes with but if you want to be able to swap rails/mounts/optics around with your very likely other Picatinny railed guns this is the better way to go.
Click to expand...
This!! I've got one on my Ruger 1022 for a few years. I used blue Loctite to screw it down. I've never had an issue with this mount and allows easy swapping of scopes/Reddots. Also, the mount extends about an inch over the barrel allowing for proper eye relief when mounting a scope.
 
You must log in or register to reply here.
Back
Top Bottom