Where to find…..

[kamlooky]

A CZ 452 threaded barrel end cap?

Seems these go missing like the rear sight insert.
Someone must have a bucket full of these including the infamous 10mm sockets.

Could this be Mikeezs work?

 

[FatCatsDad]

I got mine from Nordic Marksman.
My 452 is threaded ½-20 not the normal ½-28

½-28 are readily available at many vendors

I could only find ½-20 at Nordic $18 for a single unit.

The ones at Nordic are available in different diameters for various barrel profiles.

https://nordicmarksman.com/equipment/barrel-thread-protectors/

 

[Paul_T]

What is the thread? I made a few in different materials for my old T1X. Think I have a couple left

 

[kamlooky]

I don’t have the rifle yet.
It’s on its journey this way.

Once it gets’ear I will know the thread.

I figured they were standard for size.

Thanks for the replies and link.

 

[Raton57]

JET tools sent me a free 10mm socket so maybe some place has free end caps.

 

[kamlooky]

JET tools sent me a free 10mm socket so maybe some place has free end caps.

Inginnuzz.
Take a 10mm sawkit’n thread the belly.
Screw it on the end awf the bawrill.

 

[guntech]

I got mine from Nordic Marksman.
My 452 is threaded ½-20 not the normal ½-28

1/2 x 20 is the normal thread of a Parker Hale supressor.

 

[Paul_T]

I don’t have the rifle yet.
It’s on its journey this way.

Once it gets’ear I will know the thread.

I figured they were standard for size.

Thanks for the replies and link.

Unfortunately no.

Not sure if CZ did the same as the Tikka T1x

1/2-20 UNF for Europe (maybe Canada and Australia as well, I'd have to check mine)
1/2-28 UNEF for USA

 

[Meroh]

I don’t have the rifle yet.
It’s on its journey this way.

Once it gets’ear I will know the thread.

I figured they were standard for size.

Thanks for the replies and link.

My Varmint barrel has the thread size roll-stamped on the barrel. Also if your barrel is marked C-ZUB it will be 1/2 20; if it is marked CZ-USA it will be 1/2-28. I have a take-off thread protector, I was able to find a CZ Compensator in 1/2-20 at a dealer. I like it.

 

[kamlooky]

Good info Meroh.

Thanks