CZ 45 MTR in a MDT XRS Chassis..what ring height for a DNT "The One"

[Brewster20]

As the title suggests, I'm mounting a DNT "The One" 7-35 x 56 to my CZ 457 in an MDT XRS Chassis with the optional forend installed. The required rings are 34mm, but what height would clear the forend ?
The picture below is the XRS Chassis with the forend installed, you can see the height of the forend.

Thanks in advance.
Cheers

 

[boxhitch]

CZ rings only or rings on rail?

 

[Mik123]

Stack coins or business cards to figure out the height you need

 

[molodec416]

medium arken rings on 20MOA base does not clear, you need either taller base like 30MOA or the high rings if you want to put the sun shade on. Otherwise it tucks in nicely without.

 

[Brewster20]

OK, I forgot...I have an Area 419 30 pic MOA rail.

 

[molodec416]

OK, I forgot...I have an Area 419 30 pic MOA rail.

You might be just there. The Arken Ti rings in medium are 1.26” or 32mm height, mine sits at about 56mm from center bore with 20MOA base.

 

[Brewster20]

Thanks for the replies...I ordered Arken TI Mediums

Cheers