Where, in canada can I get a clasic QD stud for picatinny rail?

[GPSMapNut]

I'm looking for something like in the picture. Found it on a US site but they don't ship to Canada. Only ones I can find here have the qhole on the wrong angle. I found one with push button QD but it doesn't fit my sling and on top of it it's build like a tank. Too heavy for Mossin Nagant, never mind my Tikka

 

[Rman]

Amazon….

R.

 

[FatCatsDad]

I've got this you can have at no charge.
Its Aluminim and weighs next to nothing.

 

[GPSMapNut]

Amazon….

R.

I wish.

 

[Keller]

I ordered one from Amazon, quality is as expected but it hasn't broken yet. It may not come with the sling swivel part, but you can get those anywhere.

 

[GPSMapNut]

I've got this you can have at no charge.
Its Aluminim and weighs next to nothing.

View attachment 1061764View attachment 1061765View attachment 1061766View attachment 1061767

Thank you very much for your offer but it looks to be about 3 slots long. I need a one slot solution. Actually, I just figured out a simple one. I'll just make a custom stud that will replace the rear mounting screw.

 

[GPSMapNut]

I ordered one from Amazon, quality is as expected but it hasn't broken yet. It may not come with the sling swivel part, but you can get those anywhere.

View attachment 1061880

Seen these. Too long. I have 5 slot rail and need to keep the front 4 available for the tripod.

 

[Keller]

Can you add a longer rail?

Does the bipod allow for a sling mount like a Harris bipod?

 

[Rman]

I wish.

It’s there….

 

[olefrt63]

I'm looking for something like in the picture. Found it on a US site but they don't ship to Canada. Only ones I can find here have the qhole on the wrong angle. I found one with push button QD but it doesn't fit my sling and on top of it it's build like a tank. Too heavy for Mossin Nagant, never mind my Tikka
View attachment 1061365

Amazon! Mine works fine.

 

[GPSMapNut]

It's a cheap tripod from Amazon and it has no sling mount.
I've already drilled fir 5 slot and I'd like to keep it compact and inexpensive so it will stay.

It’s there….

View attachment 1061896

Thanks. Didn't see this one... 35 bucks... that's about 500 CCIs sv... I'll consider it if my custom stud won't work out.

 

[GPSMapNut]

Amazon! Mine works fine.

That's a push button qd, not what I need. In any case, I do have a solution and not looking for one any more.

 

[Rman]

Seen these. Too long. I have 5 slot rail and need to keep the front 4 available for the tripod. View attachment 1061883

Replace the rear rail bolt with a sing swivel stud... cheapest and easiest. Make sure it's long enogh to capture a nut on the barrel side of the stock, and allow for a washer large enough so it doesn't pull through.

That is probably what you're doing with the custom stud solution... it will work well.

R.

 

[Hunter7]

Amazon or eBay,lots of these things available from china cheap with free shipping.

 

[GPSMapNut]

Replace the rear rail bolt with a sing swivel stud... cheapest and easiest. Make sure it's long enogh to capture a nut on the barrel side of the stock, and allow for a washer large enough so it doesn't pull through.

That is probably what you're doing with the custom stud solution... it will work well.

R.

This is exactly my plan, except I have to make one. The original sits to deep in the rail. With a spacer it's too short. It's for Tikka so, M5 thread and no readily avaliable in an extended version.

 

[Rman]

This is exactly my plan, except I have to make one. The original sits to deep in the rail. With a spacer it's too short. It's for Tikka so, M5 thread and no readily avaliable in an extended version.

You can get M5 extension nuts...
You can also get a riv nut that can come down from the top and may be able to reach.

R.

 

[GPSMapNut]

Done!

 

[Rman]

Nice work!
How did it go on on the inside?

R.

 

[GPSMapNut]

This stud went into the original sling stud insert. The threaded bottom had to be longer than the original stud to compensate for the added thickness of the beavertail overlay and the rail. The top portion could've been shorter but I just wanted to be sure that the hole cleared the rail
After all, I'm in Canada so I didn't take the rifle to work to match everything in real time... Measure at home, make it at work adding a fudge (####up) margin. Well, I doubled the margin since I'm planning to get a chance to test it shortly... After all, as a Mississauga resident, I don't get to many chances to chamber a life round so, going up North for New Year, I'm not about to miss it