Benelli M4 with Advanced Impact Choke system!

[Al Flaherty's]

BTW, i have a few more pics from my visit if you need them...here they are

https://photos.smugmug.com/photos/i...CcvmjGQ4gZHmZqJk7r/XL/i-bDDgstv-XL.jpg[//img]

https://photos.smugmug.com/photos/i-McLpc2c/0/MKxtFDZJKNj66Zc4xvppGjdL7DQgt4v6BTJ8TXJMF/XL/i-McLpc2c-XL.jpg

[IMG]https://photos.smugmug.com/photos/i-TPGfM9f/0/Nb5tHB683bZ5WgmjKvQvx8btfxJPLTm9tBFmKWJNk/XL/i-TPGfM9f-XL.jpg

https://photos.smugmug.com/photos/i...kLrQmvhkmqJFbRDK5x/XL/i-gGMn5Q5-XL.jpg[//img]

https://photos.smugmug.com/photos/i-NGRXGb5/0/LW35fP9zGFgdNFGBTc6jcPkgnCQLWWQRRnhTwQhgc/XL/i-NGRXGb5-XL.jpg

[IMG]https://photos.smugmug.com/photos/i-8rwdH2s/0/L8KSjpcrhNJz4f5dBqT3J6BJJkmqsg3KsDT9nt75b/X2/i-8rwdH2s-X2.jpg

Thank you!

 

[1ABNDT]

Benelli M4 Drone Guardian

 

[RedTeam98]

You are correct and validating my findings. Information on Stoeger Canada's site informed me that Beretta does not recommend slugs through anything tighter than their Improved Cylinder chokes. I thought wtf!? Slugs have ALWAYS been gtg through a modified choke, so I started down the information rabbit hole and found that at least with Beretta's Optima HP choke tubes, they are all tighter than our standard SAAMI specs. Not by much mind you, but tighter.

Edit: slugs pattern just fine out of their modified choke tube btw. Despite Beretta's recommendations, it's what I use, as it also patterns flightcontrol buckshot best.

I installed a Bennelli Cylinder Choke Tube in my M4 for Breneke Original Magnum slugs for Bear protection removed the Modified factory tube.

 

[tmpart]

I installed a Bennelli Cylinder Choke Tube in my M4 for Breneke Original Magnum slugs for Bear protection removed the Modified factory tube.

Thanks for the update!
Where did you get the Benelli cylinder choke for the new A. I. Barrel? They are so much longer than the standard choke tubes.