REM 870 barrels 12GA

[.22LRGUY]

I can’t find a link, but I’ve seen shorter, LE barrels with low profile sights…rear looks non-adjustable…just a shallow “V”? A fine/white line for quick alignment with the front..? Seemed like such a good/robust idea.
As I get older, I find single beads on shorter barrels getting harder to find.

Threaded would be great, polished deep blue for me and sure…parkerized for those tactical guys. Haha

 

[Arietta]

18.5" polished blue, rifle sights, ball detent, fixed IC choke.

 

[badboybeeson]

18.5" polished blue, rifle sights, ball detent, fixed IC choke.

we don,t have anyone that can do bluing, if you know of anyone in ontaro do let us know

 

[rubberdonuts]

12.5” with pedestals for beads. Threaded isn’t necessary with this short of barrel. Ball detent.

 

[No name]

Please make some 12.5" barrels aswell exactly like rubberdonuts had suggested to start out with and then if possible some setup with rifle sights, same length.

Here's some of Remington's 14" barrels with sight setups just for quick reference for everyone, I imagine it might get a little pricey if you tried to do an exact match of these though

 

[Blastattack]

16", threaded for chokes, ball detent, not picky about sights.

 

[Painkillers]

16", threaded for chokes, ball detent, not picky about sights.

Goldilocks. Add the proper length mag tube extension and a clamp and it'd be perfect.

 

[badboybeeson]

Goldilocks. Add the proper length mag tube extension and a clamp and it'd be perfect.

Thr clamp and magtube are easy,
16 inches is no problem

 

[No name]

Thr clamp and magtube are easy,
16 inches is no problem

I imagine your +2 Remington MCS mag extension would already be a close match for the 16" or 16.25" barrel on a regular 870.

 

[bunny]

I would go for a 38” vent rib threaded for chokes please!

 

[unstableryan]

14-16", threaded for rem chokes. Sights or not.

 

[unstableryan]

Or something silly. 40" super full choke.

 

[Painkillers]

 

[scott.y.]

14-16 with some type of sighting system.
Chokes are optional for me.

 

[TreMoR]

14" and rem choke....

 

[EighteenTwelver]

Somewhat related, do you have any plans on making the MCS specific barrel mounted picatinny rail?

 

[Chrispy123]

12.5” with pedestals for beads. Threaded isn’t necessary with this short of barrel. Ball detent.

Please correct me if I’m wrong, but anything shorter than 14” on an 870, doesn’t that require the mag tube / slide to be shortened to fit?

 

[Chrispy123]

I would go for a 38” vent rib threaded for chokes please!

But 28” for me please.

 

[rubberdonuts]

Please correct me if I’m wrong, but anything shorter than 14” on an 870, doesn’t that require the mag tube / slide to be shortened to fit?

No sir, 12.5 is as short a barrel can get before that is required. Barrel is flush with the mag tube cap. Super handy setup.

 

[Gilford]

For that tacticool side: 12.5" and 14" options threaded for rem chokes. I'm a sucker for all shotgun barrels being vent ribbed.
For hunting: i would 100% be down for a 30" vent rib threaded for rem chokes.