MRA Renegade Mark II .223Wylde 12.5" Black Non-Restricted

North_Sylva

CGN Ultra frequent flyer
Business Member
Rating - 100%
9   0   0
SKU#: MRA-2135. MAP $1499.95.
  • Calibre: .223 Wylde
  • Barrel Lengths: 12.5"
  • Barrel Twist Rate: 1:8
  • Barrel Profile: Full Profile Non-Fluted Barrel
  • Barrel Finish: Black Nitride
  • Handguard Length: 11.5"
  • Handguard Profile: V1 M-LOK Handguard
  • Receiver and Bottom Metal Material: High quality, domestically sourced 6061-T6 alloy
  • Receiver and Bottom Metal Finish: Hard Black Anodizing
  • Bolt Carrier Material: HTSR 4140 steel
  • Bolt Carrier Finish: QPQ Black Nitride
  • Muzzle Device: Threaded Muzzle Protector
  • Trigger: Mil-Spec Trigger Assembly
  • Furniture:
    • A2 polymer grip
    • Canuck 6-Position sliding buttstock
  • Weight: (Without Magazine)
    • 12.5" Barrel: 5 lbs 9.2 oz
  • Overall Length Fully Assembled: (Collapsed Stock)
    • 12.5" Barrel: 27.75"

Includes​

  • 1x MRA Renegade Rifle MkII 223 Wylde
  • 1x CPD DuraMag 5/10rd magazine**
  • 1x MRA Crowfoot Wrench
**Included magazine brand/size may vary depending upon availability during time of manufacture.

Stocking Dealers:
- G4C Sports
- Red Deer Shooting Centre
- Siwash Sports
- Tenda
- The Gun Room
- CRAFM
- Firearms Outlet Canada
- Liangjian Outdoors
- Tillsonburg Gunshop
- International Shooting Supplies

1773426354329.png
1773426402167.png
1773426361898.png
1773426367827.png
1773426374666.png
1773426381643.png
1773426388597.png
1773426394096.png
 
Last edited:
Is everything{barrel/lpk etc.} AR compatible? If so, will {just} the receivers/bcg be available separate?
 
Last edited:
We have received another shipment of these. They're going out to stocking dealers in 7-10 business days.
 
It would be {to me anyways lol} if these were Hybrid-Straight pull/Pump. I'm kinda edging towards something in 5.56, that has a pump' action...but I do like these...decisions- decisions..
 
It would be {to me anyways lol} if these were Hybrid-Straight pull/Pump. I'm kinda edging towards something in 5.56, that has a pump' action...but I do like these...decisions- decisions..
I own one of these in 12.5" and a 10.5" Troy pump.

Can't go wrong with either, pump is faster to operate but also has potential for failure with the pump rod.

These are excellent rifles and I'm looking at another in 300 blackout.
 
^ ya, that's why I was thinking of a 'Hybrid' .. you have a back-up! I saw a thread of some guy, that did a DIY, with straight-pull to pump...
With some already having that{both}..it sorta appeals to me, I wish they all would do this.
 
^ ya, that's why I was thinking of a 'Hybrid' .. you have a back-up! I saw a thread of some guy, that did a DIY, with straight-pull to pump...
With some already having that{both}..it sorta appeals to me, I wish they all would do this.
Ya I've seen that video.

There's the Taipan which is pump and straight pull.

What turns me off about it is that it doesn't lock in battery.
 
Ya I've seen that video.

There's the Taipan which is pump and straight pull.

What turns me off about it is that it doesn't lock in battery.

That troubles me too. When I think about how I hold the gun (left hand pulling back) that wont work.

Does the Troy lock in the forward position until fired?
 
Yea the Troy locks, I run a taipan x and i have had no issues with it

I just looked it up and that was what I read.

Looks like the Troy accepts AR triggers too......?

I have a decent amount of 223 to shoot after Team Elevated Elbows got frisky with the ban hammer so this might work.
 
I just looked it up and that was what I read.

Looks like the Troy accepts AR triggers too......?

I have a decent amount of 223 to shoot after Team Elevated Elbows got frisky with the ban hammer so this might work.
Not sure on that, but I went taipan over the Troy for the stainless barrel and spring assist.
 
Back
Top Bottom