Ruger 10/22 BX-Trigger & Timney CZ 457 Trigger Back In Stock!

[CANADAS GUN STORE]

Ruger 10/22 Red BX-Trigger 2.75 Pound - $139.99​

​

Ruger 10/22 BX-Trigger 2.75 Pound - Sold out​

​

Timney CZ 457 Flat Blade Trigger 10oz-2lb - $299.99​

​

 

[MiloNitro]

I’m sorry if this is a dumb question. Will the 10/22 trigger group work in an Adler rf224?

 

[Longstud]

Apparently the Ruger trigger will fit the Adler RF but the pins are not exactly the same size. The Ruger pins might work but the holes on the trigger might need slight enlargement with file or proper drill bit for the Adler pins! There are no stupid questions. Cheers

 

[Longstud]

Apparently the Ruger trigger will fit the Adler RF but the pins are not exactly the same size. The Ruger pins might work but the holes on the trigger might need slight enlargement with file or proper drill bit for the Adler pins! There are no stupid questions.

 

[CANADAS GUN STORE]

I’m sorry if this is a dumb question. Will the 10/22 trigger group work in an Adler rf224?

I would assume they would or would be a close fit but unfortunately we do not have a Adler in the store to test this.

 

[CANADAS GUN STORE]

BTT

 

[luv2roll]

Does the Ruger 10/22 Red BX-Trigger 2.75 Pound - $139.99 come with the extended mag release pictured on the site here? https://www.canadasgunstore.ca/prod...its-all-10-22-rifles---22-chargers|90631.html

 

[CANADAS GUN STORE]

Does the Ruger 10/22 Red BX-Trigger 2.75 Pound - $139.99 come with the extended mag release pictured on the site here? https://www.canadasgunstore.ca/products/ruger-red-bx-trigger-2-75-pound-drop-in-fits-all-10-22-rifles---22-chargers|90631.html

Good eye luv2roll,

Thank you for pointing that out. Sadly it does not have the extended mag release. I have just submitted the accurate image to be updated on the website, which should reflect within the next day or so.

We appreciate you letting us know.

 

[dakota123]

Anyone have some real world experience with this timney trigger for the 457?

I got the factory trigger with a yodave trigger spring and Gunsmoke flat blade trigger shoe,

Would the juice be worth the squeeze or not?

 

[ted_dent]

Anyone have some real world experience with this timney trigger for the 457?

I got the factory trigger with a yodave trigger spring and Gunsmoke flat blade trigger shoe,

Would the juice be worth the squeeze or not?

I have these in my 457 MTR and 457 AT-One. Since the only other triggers I've tried are the factory ones (not bad but no comparison to the Timneys) I can't speak to the difference between these and your setup but I love mine. No creep at all, they will go down as low as 10 oz. and installation is chimpanzee easy. There are a few triggers like the Jard which will go even lower (about 4 oz., I believe) but to me that is far too low to be safe plus they cost more than the Timney. I have zero complaints and would buy them again in heartbeat.

 

[luv2roll]

Good eye luv2roll,

Thank you for pointing that out. Sadly it does not have the extended mag release. I have just submitted the accurate image to be updated on the website, which should reflect within the next day or so.

We appreciate you letting us know.

Thank you for the reply and for sorting that out.

 

[vpsalin]

Auto bolt release on these?

 

[CANADAS GUN STORE]

Auto bolt release on these?

Unfortunately no. These triggers are very similar to the factory version, with the primary upgrade being a significantly lighter trigger pull. There may be a few other minor differences, but the improved trigger is the main feature.

Happy shooting,
Josh