41 Long Colt components needed

I carry the H&C dies & tools, and have some Starline brass still. It's easier to get these days, so shouldn't be difficult. The H&C kit is strictly "whack-a-mole" type hand loading, but once you got your groove going, you can load 50 rounds in under an hour...
 
You will probably need to cast for it too. 41lc doesn’t use standard bullets they either have to be hollow base to expand to the bore diameter or shouldered like a 22lr bullet
 
+1 for old guns Canada, I've gotten some brass from him. Nice guy.
Rusty wood has 41lc redding dies for a press, although last I checked the price had climbed because they bought theirs during the tariff war, so they were a bit more, (which I get) however, I snagged mine from x-reload during a sale, I find them a little more expensive, but the deals are there during sales for sure, and sometimes they have hard to find stuff.

I've fairly recently started casting for 41lc with the hollow base that can expand to fill the barrel, it definitely takes more time than normal casting, but it is doable provided you can find the mold.

I plan on pan-lubing them as I normally powder coat my cast bullets, however I suspect it's not enough on these that intend to expand, likely cracking the powder coat.

If someone needed some cast bullets in small batches they could PM me (I'm in the maritimes) but could ship some to get ya started.
 
Ungrateful said:
You will probably need to cast for it too. 41lc doesn’t use standard bullets they either have to be hollow base to expand to the bore diameter or shouldered like a 22lr bullet
Click to expand...
I think that Beaks & Brass has the special 41LC heeled bullet, even. They also have "normal" type bullets for it.
 
You must log in or register to reply here.
Back
Top Bottom