Northernrim .22LR Rifles are Now In-Stock!

hunterhenderson said:
Thanks John, its a very clear nice little scope, cant have too big of a scope on that little 22lr, I bought it from Tenda for $260, worth every cent

I just shot a few behind my shop, diet coke cans at 30 meters, fun and hit everything i aimed at, ill try it on paper at 50 yards later this weekend, very nice inexpensive guns
Click to expand...
Do you know where the parallax is set on that scope?
 
I tested the trigger on mine and broke at 2.5lbs relatively consistent with some pulls just a bit over (might be me, I have the mechanical Wheeler gauge).
 
For anyone that has shot theirs..... How well to the magazines seem to be working?
Looking forward to more range reports!
:)
 
Can any one comfrim its 1/2x28 most sights say that it is tenda says 1/2x20 maybe comes in both I orderd from firearms out let and itbsaysn1/2x28
 
Ehaayer said:
Can any one comfrim its 1/2x28 most sights say that it is tenda says 1/2x20 maybe comes in both I orderd from firearms out let and itbsaysn1/2x28
Click to expand...
I haven't handled one of the northerns. Thought if my memory is correct, the thread protector looks identical to the Scorpios(1/2-20). If you have already recieved the gun, post a couple of clear photos of the threads and I'll be able to tell you.
 
KyleSchenk said:
I haven't handled one of the northerns. Thought if my memory is correct, the thread protector looks identical to the Scorpios(1/2-20). If you have already recieved the gun, post a couple of clear photos of the threads and I'll be able to tell you.
Click to expand...
I can’t tell ither it says its 28 but from
What I can gather its must come in both I’ll find out end of the week worst cast order an adaptor
 
Anyone have any issues with the rail being outta spec on these? I mounted a 3x12 vortex and ran outta up adjustment trying to get a 25 yard zero. Something definitely is outta wack with my rail on the rifle
 
6ohmoney said:
Anyone have any issues with the rail being outta spec on these? I mounted a 3x12 vortex and ran outta up adjustment trying to get a 25 yard zero. Something definitely is outta wack with my rail on the rifle
Click to expand...
I sort of doubt it's the rail, maybe the barrel's pointing down for some reason.
How low are you hitting at 25 yards with your scope cranked all the way to max elevation?
 
db said:
Yep , I have the same issue had to shim the rear ring to get enough up elevation travel.
Click to expand...
This is starting to sound like a trend.... are the rail's drilled and tapped into the receiver?
It seems like the barrels might be drooping a bit on some units.

How much shim did it require and are you now in the middle range of your elevation turret or still on the high side?

I was going to buy one from tenda last week along with the Derya 9mm bolt but had to cancel the order due to them not being willing or able to do PAL verification by video call.
 
You must log in or register to reply here.
Back
Top Bottom