FN (Browning) FAL Para .308 Match Rifle

I have always wanted a Para FAL with the iconic Folding Stock mechanism, but have never encountered one for sale. Perusing the DSA FAL website recently it came to my attention that they sell Do It Yourself metric FAL Para Conversion Kits. I ordered up a kit through A Z T E C H Armoury and it was delivered less than a month later. I inspected the package of parts for any missing items and was pleased to find that everything necessary was included along with a few spare screws and the like.

The base rifle is a Fabrique Nationale / Browning Fusil Automatique Leger (FAL) ".308 Match" model in Excellent to "as new" condition. After removing and completely stripping out the Lower Receiver it was a relatively simple matter to transfer those parts over to the stripped Aluminum Lower Receiver for the Para FAL. From there it was an easy install of the Picatinny Scope Mount Rail on the Upper Receiver, followed by final assembly of the field-stripped rifle. Easy-Peasey, all things considered.....

Here is the finished product for your persual....


View attachment 1221634


View attachment 1221636
Nice. I like it. - dan
 
Except that in my case, the two terms apply since it is a 21" Barrelled, ".308 Match" stamped Upper Receiver, now mated with a Para Lower Receiver and Para Upper Receiver internals. Not all Para FALs had the short 18" Barrel, some models featured the longer 21" Barrel fitted with the typical 22mm diameter FAL Compen̈sator/Flash Hider. The FN FAL 50.61 had a steel Lower Receiver, whereas the 21" FAL 50.64 featured an aluminum Lower exactly like mine.
I own exactly the same rifle as you have and would like to do the same type of conversion. did you do the conversion yourself or did you have a smith do the work? can you message me the parts list you ordered to do the conversion, the para model FN FAL is the one stop shop do it all rifle IMO plus it looks so damn good. btw, I just came into an HK 22 lr conversion kit but the one magazine that came with the kit is inch pattern. it will work in my L1A1 but not my belgian 308 match. I also need to straighten the barrel insert as it got bent somewhere in the postal shipping trip. congrats on your rifle, its just fantastic.
 
There is nothing overly special about the FAL. They are heavy and very long rifle. Mostly you only want one because the govt says you can't have one.
I agree. A lot of misty eyed veterans think it was the ultimate in battle rifles because it kicks. You are welcome to your opinion. My preference for a service rifle will be the C7 family or the 9mm SMG C1 for vehicle work.

Logically for target or precision shooting, why would anyone choose a rifle with a hinge in the middle, the sights on different pieces, a back sight that folds up and down and rotates, and a sight radius that stops 12" short of the muzzle?
 
^^^
Same reason people like '70 Chevelles, Old Land Cruisers and mechanical watches. Just because they're no longer the pinnacle of performance that doesn't diminish their appeal. I agree with you - for utilitarian scenarios there are better rifles but, for me at least, it's hard to beat the panache of an FAL.
 
The Para FAL (particularly in it's short barreled configuration) is still my grail gun - I would trade every firearm I own for the opportunity to have one, but alas, I was born too late. :(

I have a deactivated Australian L1A1 that's #### and click, and I have been considering trying to get parts to convert it into a short barrel, folding stock Para, but I would imagine that it would require modifications beyond the scope of what's permissible (dewat the donor barrel before removing the old one, maybe?) - it would be a very expensive project either way, for a gun that still can't function. I might as well buy a nice airsoft rifle for way, way less money.

Bradley
The right answer: If it's been legally deactivated, its no longer a firearm, so you can do whatever you want with it.

The cucked answer: how dare you even think of anything firearm related, off to the gulag with you!
 
I too believe that the FAL peaked during the Cold War, where it was the dominant small arm of the Western world, adopted by over 90 nations. That is no small feat! More modern iterations of the FAL produced by DSArms in the USA have suppressed barrels as short as 11", producing a much handier (and lighter-weight) "Battle Rifle". The latest Scope-Mount Body-Cover and the MLOC Handguard form a continuous PIcatinny Top Rail suitable for mounting optics, clip-on thermal imagers and lasers. Chamber them in 6.5 CM for less recoil and a flatter trajectory, and you could really be on to something...

videoframe_39287.png


I found the iron sights of the FAL to be increasingly difficult to use effectively with my aging eyesight. That said, the addition of even a fixed, low-power optic is a real game-changer in terms of target acquisition and engagement, as I recently discovered. The full-auto shoot in Wainwright, AB at the end of September gave me the opportunity to fire my FN C1A1 (among other prohibs) on loan to the VPA museum for the weekend. This in turn, allowed me to fire the rifle for the very first time with the fixed 4x "C1 Sniper Scope" manufactured by Ernst Leitz Canada. attached. Wow! What a difference that little combat optic made, with its built-in Bullet-Drop Compensation, and other nifty features. I could readily see my targets with crystal clarity out past 400m and was able to quickly engage them with first-round hits based on range estimation. The C1 Sniper Scope was a very capable combat optic which would have been well-suited to general issue along with every FN C1A1 and FN C2A1 in the inventory. Situated on the Upper Receiver along with the Locked Breech and Barrel, the optic significantly enhanced the rifle's accuracy by eliminating the iron sights issue of having the Foresight on the Upper Receiver and the Rear Sight on the Lower Receiver, subject to lateral and vertical slop in the fitment of the two principal parts of the rifle. The tremendous advantage provided by the C1 Sniper Scope on my C1A1 is what convinced me to keep things simple on my FAL Para by mounting an illuminated Primary Arms fixed 5x Prism Optic. It is just about the perfect optic for the FAL, IMHO.

FN C1A1.jpg


20261107-135944 (1).jpg


Bottom Line? In my opinion the DSArms FAL OSW chambered in 6.5 CM and equipped with a fixed 3x or 5x Prism Sight on a full-length Picatinny top Rail still has much practical utility in today's world. We ought not entirely discount the FAL as an antiquated relic of the Cold War so long as it remains under active production and enhancement by DSA in the USA. The OSW is just one of many possible configurations based on different Barrel Lengths and folding/telescoping Buttstock designs. Considering the age of its initial design, the FN FAL is surprisingly modular in its design and construction - a testament to the genius of its principal Belgian designer, Dieudonne Saive....
 
There is nothing overly special about the FAL. They are heavy and very long rifle. Mostly you only want one because the govt says you can't have one.
Oh ya... then tell me why I feel like a need a cigarette after reading Marks post...:giggle:

Honestly, wanted one cuz the gov says no, goes for a few rifles on my bucket list.

Dragonov & FN-C1A1.jpg
(AI generated)
 
G3 is a good comeback but I'd still take the FAL. Nicely done!
I tried. :LOL:

I actually have both. :cool:

The G3 was the first rifle I ever fired and it left a big impression on me. I trained with the FAL in the CF and that experience made me hate the FAL for a long time. Then circumstances lead me to become a FAL owner. Then years later more circumstances lead me to G3 ownership.
 
I own exactly the same rifle as you have and would like to do the same type of conversion. did you do the conversion yourself or did you have a smith do the work? can you message me the parts list you ordered to do the conversion, the para model FN FAL is the one stop shop do it all rifle IMO plus it looks so damn good. btw, I just came into an HK 22 lr conversion kit but the one magazine that came with the kit is inch pattern. it will work in my L1A1 but not my belgian 308 match. I also need to straighten the barrel insert as it got bent somewhere in the postal shipping trip. congrats on your rifle, its just fantastic.

DSArms makes the conversion a very simple matter by offering up a range of options with a full Lower Receiver, or just the critical Para conversion parts. The choice is entirely yours. I elected to save some money by ordering up a stripped Lower Receiver and transferring over the Trigger Mechanism and Upper Receiver Latching System from my "Match .308" Lower. In all honesty it was a pretty simple matter to transfer over the Lower Receiver parts. Then again, if you want to be able to quickly swap back and forth between complete fixed-buttstock and folding Lower Receivers, then you will want to order up a complete new Para Lower Receiver to go with the upper Receiver conversion parts: https://dsarms.com/product/dsa-fal-...l-sa58-para-conversion-kit-includes-stock-in/

Here is the kit that I went with: https://dsarms.com/product/dsa-fal-...pe-mount-springs-and-para-sight-no-internals/

You can also order up an extended-length Picatinny Body Cover that mates with the Picatinny/MLOC Handguard also sold by DSA: https://dsarms.com/product/dsa-fal-sa58-metric-full-length-gas-system-m-lok-interface-handguard/

Here are the 30 pages of Metric FN FAL parts sold by DSArms: https://dsarms.com/product-category/fal-sa58-parts/

I used A Z T E C H Armoury for the import. They now have the conversion kit that I used on their website ready to order with Brokerage already factored-in. Do a search for "DSA" or "FN FAL" on the A Z T E C H site and the links for available parts will pop up for your shopping convenience. If you see something that you want in the DSA catalogue that is not listed on the A Z T E C H site, just write to A Z T E C H with the DSA part/kit link and ask them to add that particular item to their website. Easy-Peasey!
 
Last edited:
I tried. :LOL:

I actually have both. :cool:

The G3 was the first rifle I ever fired and it left a big impression on me. I trained with the FAL in the CF and that experience made me hate the FAL for a long time. Then circumstances lead me to become a FAL owner. Then years later more circumstances lead me to G3 ownership.
Well I know that you don't care about me but now I hate you. Grin. My experience is similar to yours but I was too dumb to pick up an FAL when I could...'there's always tomorrow'.

Seriously, glad you had a couple of grail guns and got to shoot them. I admit the FAL is about memories but I still say it's one bad ass rifle.

Thanks for the replies. As one guy's tagline on here says "that was fun!".
 
There is nothing overly special about the FAL. They are heavy and very long rifle. Mostly you only want one because the govt says you can't have one.
don't disagree, also nothing special about an 1897 but I love them too and I actually found out the FAL were prohib when I looked into getting one/pricing probably 10 years ago, so wanted one before the government told me I couldn't have one.....

Video games are more of a reason for me to want it, than the government saying no if I am being honest.
 
A pig of a rifle.

Agreed. I have a very nice example of a MAS (France) manufactured G3A3, intended primarily for equipping the armed forces of (then) current and former French colonies in Africa. The G3 isn't an utter piece of crap, not by a long-shot. It is in fact, a competent "Battle Rifle", second only to the FN FAL in terms of Cold War production numbers. The G3 is shorter than the FAL, but is plagued by stouter recoil and poor ergonomics in terms of controls-reach. Arguably the biggest single shortcoming of the G3 however, particularly for Western-trained shooters, is the lack of a last-round hold-open and associated Bolt-Catch. The lack of a last-round hold-open means that the firer is given no instant indication that all ammunition within the magazine and chamber has been expended. The loudest sound you never want to hear in an armed encounter is a "click" when you were intending and REALLY counting on a "bang"...... And that is the G3's unforgivable "Fatal Flaw" in my gunfight-informed opinion. YMMV, based on your own experience with the G3 and/or warfighting....


20241120-042000.jpg
 
I too believe that the FAL peaked during the Cold War, where it was the dominant small arm of the Western world, adopted by over 90 nations. That is no small feat! More modern iterations of the FAL produced by DSArms in the USA have suppressed barrels as short as 11", producing a much handier (and lighter-weight) "Battle Rifle". The latest Scope-Mount Body-Cover and the MLOC Handguard form a continuous PIcatinny Top Rail suitable for mounting optics, clip-on thermal imagers and lasers. Chamber them in 6.5 CM for less recoil and a flatter trajectory, and you could really be on to something...

View attachment 1236106


I found the iron sights of the FAL to be increasingly difficult to use effectively with my aging eyesight. That said, the addition of even a fixed, low-power optic is a real game-changer in terms of target acquisition and engagement, as I recently discovered. The full-auto shoot in Wainwright, AB at the end of September gave me the opportunity to fire my FN C1A1 (among other prohibs) on loan to the VPA museum for the weekend. This in turn, allowed me to fire the rifle for the very first time with the fixed 4x "C1 Sniper Scope" manufactured by Ernst Leitz Canada. attached. Wow! What a difference that little combat optic made, with its built-in Bullet-Drop Compensation, and other nifty features. I could readily see my targets with crystal clarity out past 400m and was able to quickly engage them with first-round hits based on range estimation. The C1 Sniper Scope was a very capable combat optic which would have been well-suited to general issue along with every FN C1A1 and FN C2A1 in the inventory. Situated on the Upper Receiver along with the Locked Breech and Barrel, the optic significantly enhanced the rifle's accuracy by eliminating the iron sights issue of having the Foresight on the Upper Receiver and the Rear Sight on the Lower Receiver, subject to lateral and vertical slop in the fitment of the two principal parts of the rifle. The tremendous advantage provided by the C1 Sniper Scope on my C1A1 is what convinced me to keep things simple on my FAL Para by mounting an illuminated Primary Arms fixed 5x Prism Optic. It is just about the perfect optic for the FAL, IMHO.

View attachment 1236092


View attachment 1236100


Bottom Line? In my opinion the DSArms FAL OSW chambered in 6.5 CM and equipped with a fixed 3x or 5x Prism Sight on a full-length Picatinny top Rail still has much practical utility in today's world. We ought not entirely discount the FAL as an antiquated relic of the Cold War so long as it remains under active production and enhancement by DSA in the USA. The OSW is just one of many possible configurations based on different Barrel Lengths and folding/telescoping Buttstock designs. Considering the age of its initial design, the FN FAL is surprisingly modular in its design and construction - a testament to the genius of its principal Belgian designer, Dieudonne Saive....
Bartok5 you have the most ###yiest threads on CGN LOL!!!!!
 
@Bartok. Dont get me wrong. I think its a great rifle, extremely reliable, etc. But as you say the ergos absolutely suck. If you tossed one to me, i wouldnt say no though.
 
Back
Top Bottom