Copper fouled barrel?? 308

WhelanLad

CGN Ultra frequent flyer
Rating - 0%
0   0   0
Location
Australia AU
Ermm, Is this the notorious Copper fouling ?
Or just where some jacket has skimmed as per usual?

Rifle is the FRANCHI horizon an I've been using the CAMPRO a bit lately. Maybe 20-30rounds.

I last shot SST 180gr thru it--- I can't be sure if was there prior or not.


So Do I need to soak and brush then patch out this ??
Or is it a normal jacket foul up?

**** For the record the Campros are a Jacketed SP version! NOT PLATED.

the Tikka doesnt have this fouling an it was shooting Campro recently aswell... Hot loads.


IMG_20261110_211128~2.jpg
 
Last edited:
When accuracy departs from the norm, hose it down ……

The most common phrase in any gun-cleaning discussion. And one I have never understood. Why would anybody want accuracy to degrade before cleaning their bore? Why not clean it before you lose accuracy. Why wait to miss something or shoot a poor score before cleaning?It really isn't that difficult.
 
The most common phrase in any gun-cleaning discussion. And one I have never understood. Why would anybody want accuracy to degrade before cleaning their bore? Why not clean it before you lose accuracy. Why wait to miss something or shoot a poor score before cleaning?It really isn't that difficult.
Because it’s what the cool kids say to do.
 
Yes.

Copper fouling and jacket material are the same thing. Where do you think copper fouling comes from?
I had seprated the two in regards to perhaps one of the two was merely a process, an whereas the other was a then end result of said process....

perhaps im uneducated on the topic an was not sure if the colouring i was seeing was in fact a normality or perhaps it was known issue ala copper fouling, in which ive not met before previously an only having met the cousin, Lead fouling.

have a good day mate
 
How’s the rifle shoot?

When accuracy departs from the norm, hose it down with wipeout……
It's actually the gun I've been using to test out some loads with various bullets...
So tbh I havnt shot a group with the original downloaded 150hot cor, but I've had some good groups with a few other bullets and charges- so it's actually hard to gauge what its accuracy is 🫣😂
If you make sense of that 🤷

What I now plan on doing is shooting a group with the X bullet at Y charge as it is currently, fairly cleaned patched barrel ..
Then Il get copper solvent this weekend and give it a rinse- then shoot the same X Y on the target 😎

Thanks LD
 
It's actually the gun I've been using to test out some loads with various bullets...
So tbh I havnt shot a group with the original downloaded 150hot cor, but I've had some good groups with a few other bullets and charges- so it's actually hard to gauge what its accuracy is 🫣😂
If you make sense of that 🤷

What I now plan on doing is shooting a group with the X bullet at Y charge as it is currently, fairly cleaned patched barrel ..
Then Il get copper solvent this weekend and give it a rinse- then shoot the same X Y on the target 😎

Thanks LD
Just clean the rifle, since you’re all over the place anyways….

You do carry on like a squirrel with ADHD with your approach to things it seems.

Try slowing down and approaching things more methodically, then you’d have a round count, and some sort of tracking on accuracy.

I approach things this way.

If I change bullet brands I go back to squeaky clean, as many jacket materials differ and some exasperate fouling when ran over each other.

I maintain a round count and keep notes as to when accuracy degrades, it’s far better to find this out at the range when practicing than while out on a hunt or in a match. If accuracy dumps at 200 rounds(for easy math) I’d be cleaning that rifle at 160-175 rounds….. you’ll also ascertain how many rounds if any it takes to have accuracy re established after a deep cleaning. Track this with different brands of bullets too because not all jackets have the same metallurgy.

And finally if your asking or wondering if a rifle needs a cleaning, then just do it….. if you’re using good cleaning gear and techniques, there’s zero chance you’ll harm anything.
 
Last edited:
I had seprated the two in regards to perhaps one of the two was merely a process, an whereas the other was a then end result of said process....

perhaps im uneducated on the topic an was not sure if the colouring i was seeing was in fact a normality or perhaps it was known issue ala copper fouling, in which ive not met before previously an only having met the cousin, Lead fouling.

have a good day mate

Cousin Nickel Fouling is the one you really have a tough time with
 
Cleaning isn't a bad thing particularly when changing between types of bullets/brands. Different types of copper can stick to each other and effect performance and accuracy. It only takes a few shots to re-fowl a barrel for the purpose of accuracy. Cheers
 
Everyone has their opinions. I have my own and have done my own research to give me what I consider to be my truth. Here is a devils advocate... Old school brain working hard to keep the plaid in line... Cheers kids
 
I had seprated the two in regards to perhaps one of the two was merely a process, an whereas the other was a then end result of said process....
Yes.

The process and the end result of that process are exactly the same thing. Copper fouling from shooting copper jacketed bullets. Where did you think the yellow stuff came from? :rolleyes:


im uneducated on the topic an was not sure if the colouring i was seeing was in fact a normality or perhaps it was known issue ala copper fouling, in which ive not met before previously an only having met the cousin, Lead fouling.
Yes.

It is a known issue and perfectly normal. 🤷‍♂️

You pushed a copper clad bullet down the bore at high velocity and that leaves copper fouling in the bore. This is about as simple 1+1=2 kind of logic. Not sure how you don't get that? Maybe rub some brain cells together and see how that works out? 🤷‍♂️
 
Back
Top Bottom