Lee Loader

For not much more you could get a lee press
The loaders work but theyre slower. A press is much more convenient and quicker. Once you have the press loading other cartridges is just a matter of screwing in other dies
 
That's where I started. Still have it. Actually have a few more now, my buddy has been given two over the years in calibers he doesn't use so he gave em to me.

They work. They neck size only, they don't fill length size. This matters more if you're using them in a pump or lever gun.

They are slow to use. But the ammo they make can be pretty good.

The powder scoop works but you don't really have much option to fine tune your load, you'd need to add a scale for that.


If you have space to set up a press, even if it's mounting a press to something you clamp to a bench or table and remove when not in use, I would go with a press. If that isn't an option, look into the Lee Hand Press. I have one, it works great and they can be had pretty cheap - mine still has the sticker on it, $35 used! Still not as good as a bench mounted press though, which is what i use these days. Have barely touched the hand press since moving to a place where I could mount a press, but it was so nice to have in my old place where that simply wasn't an option.

IMO a Lee Loader is a gateway drug, it'll get you started but you'll never be truly satisfied. At some point, you'll get a press. Considering how cheap some presses can be, Id skip the Lee loader and go straight there.
 
This seems like a real easy way to get into reloading . Anyone using one ?
I've been reloading 7.62x39 and 7.62x54mmR with this press. I don't have space for a heavy table and a big table mounted press. Obviously, you need pacesetter dies for each caliber you want to reload. With ease I can reload up to 300 rounds per month in my spare time. The only thing which limits you is the strength of your arms. Especially, for re-sizing 7.62x54R cases.
 
That's where I started. Still have it. Actually have a few more now, my buddy has been given two over the years in calibers he doesn't use so he gave em to me.

They work. They neck size only, they don't fill length size. This matters more if you're using them in a pump or lever gun.

They are slow to use. But the ammo they make can be pretty good.

The powder scoop works but you don't really have much option to fine tune your load, you'd need to add a scale for that.


If you have space to set up a press, even if it's mounting a press to something you clamp to a bench or table and remove when not in use, I would go with a press. If that isn't an option, look into the Lee Hand Press. I have one, it works great and they can be had pretty cheap - mine still has the sticker on it, $35 used! Still not as good as a bench mounted press though, which is what i use these days. Have barely touched the hand press since moving to a place where I could mount a press, but it was so nice to have in my old place where that simply wasn't an option.

IMO a Lee Loader is a gateway drug, it'll get you started but you'll never be truly satisfied. At some point, you'll get a press. Considering how cheap some presses can be, Id skip the Lee loader and go straight there.
I think the confusing part is that he wrote Lee Loader but is showing a Hand Press video, I think the guy is talking about the hand press.
 
Back in the day, a "Lee Loader" had one pound cases into a body - tap other way with a punch tool and get the case loose - I do not recall how we re-primed - same punch tool or a push by hand(?) - then use a scoop to fill with powder and then seat the bullet. I still have mine in 308 Win - next door neighbour gave me his 22-250 "Target" Lee Loader - I also bought the body unit for a 30-06. Easily many hundred rounds with those - but no press of any kind, no replaceable dies, etc. Used a mallet with a softer face and a steel face.

My Father-In-Law gave me a Uniflow powder measure, a trickler and an Ideal brand scale - that allowed me to do a bit of experimentation with different powders and different weights - but I still assembled the rounds with the "Lee Loader". We had a local store - so I just bought one pound of powder at a time - one box of bullets - one tray of primers - never knew about "Lot" numbers - got more when I ran out.

Eventually I got a single leverage RCBS cast "O"-press - many thousands rounds loaded with that using various dies. Once I retired from THE JOB, then I got a "new-from-store" RCBS ChargeMaster Lite and a used RockChucker press. What I use now - circa 25 dies sets on the shelf and various RCBS and other accessories. I never have loaded for a handgun - only rifles. I have never used a turret or progressive press - all single stage - both single leverage and compound leverage presses.

"Gate-way" - no kidding - perhaps 500 pounds bullets of various calibres on hand - plus the powder and primers, etc. Makes the reloading "gear" seem as if it is a small portion of total cost.
 
I think the confusing part is that he wrote Lee Loader but is showing a Hand Press video, I think the guy is talking about the hand press.

Hah. Clearly I didn't watch the video lol

OP, this is a Lee Loader:
1000035621.jpg
All you need to add is a hammer.

I guess my post doesn't really change though, hand press is a great compromise if a real press isn't an option.

You don't need a TON of space for a bench mounted press. Mine currently lives on a plank thats like 18"x11", i just clamp it to my desk when I need to use it.

Here it is, clamped to the shelf brackets that is it's home when it's not in use:
1000035616.jpg
 
This Lee Hand Press is what I started out handloading with when I lived in a rental townhouse and worked in camp. Super handy and simple, loaded 280, 223, 45/70, 357, 44 and probably some others on that bad boy. For the first little bit I didn’t even use a scale, just the dippers that came with Lee die sets and provided data.
 
Back
Top Bottom